Cupra BORN 2022 - Instrument Panel

20
Driver information
Sym-
bol
Meaning
Speed limiter active ›››page160
Lane Assist (lane keeping system)
active. ›››page175
Travel Assist active ›››page177
Adaptive Cruise Control (ACC) reg-
ulating, no vehicle detected ahead
›››page164
Adaptive Cruise Control (ACC) reg-
ulating, vehicle detected ahead
›››page164
Vehicle charging ›››page76
Regulation due to the road layout
›››page169
Regulation due to a roundabout
›››page169
Regulation due to a junction
›››page169
Regulation due to a speed limit
›››page169
Regulation due to the end of a traf-
c jam ›››page169
Regulation due to a speed limit
›››page169
Sym-
bol
Meaning
Main beam on or asher on
›››page113
Auto-Hold function activated
›››page188
The speed limiter is not active
›››page160
State of charge of the high-voltage
battery ›››page22
Exterior temperature below +4°C
(+39°F) ›››page25
Main beam assist active
›››page116
Take control of the steering
›››page180
Front assist switching on
›››page172
Distance warning ›››page171
Range drive prole ›››page150
CUPRA driving prole ›››page150
Comfort drive prole ›››page150
Performance drive prole
›››page150
Sym-
bol
Meaning
Individual drive prole
›››page151
Reference to information in
the on-board documentation
›››page26
Remove foot from accelerator
›››page29
Service intervals display
›››page30
Instrument panel
Introduction
After switching the drive system on with a 12-
volt battery that is heavily discharged or newly
changed some system settings (such as the
time, the date, the personalised comfort set-
tings and the programming) might be altered
or deleted. Check and correct these settings
once the battery is suiciently charged.