Disconnecting
●
In Apple CarPlay™ mode, press the CUPRA
icon to access the Full Link main menu.
●
Press to interrupt the active connection.
The representation of function buttons on the
screen may vary.
Special characteristics
During an active Apple CarPlay™ connection,
the following characteristics are applicable:
●
Bluetooth® connections between the
iPhone™ and the infotainment system are not
possible.
●
If there is an active Bluetooth® connection, it
is automatically interrupted.
●
The phone functions are only available
through Apple CarPlay™. The functions descri-
bed for the Infotainment system are not availa-
ble.
●
The connected iPhone™ cannot be used as
a media device in the Media main menu.
●
It is not possible to use the built-in navigation
system and the Apple CarPlay™ navigation sys-
tem at the same time. The last route started
interrupts the one that was previously active.
●
Depending on the infotainment system you
use, on the instrument panel screen you can
view data from the Telephone mode.
●
The instrument panel screen does not dis-
play any indication to turn.
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
Voice control
●
Press briey to start voice control using
the infotainment system.
●
Press this button for a long time to start voice
control (Siri™) of the connected iPhone™.
Note
●
The availability of technologies depends on
the country and may vary.
●
You will nd information about techni-
cal requirements, compatible iPhones, cer-
tied applications and their availability on
the CUPRA and Apple CarPlay ™ websites,
at specialised CUPRA dealerships or at any
SEAT dealership.
Android Auto™
Requirements for Android Auto™
In order to use Android Auto™, the following
requirements must be met:
●
The mobile phone device, called smart-
phone from here on, must be compatible with
Android Auto™.
●
The smartphone must have an Android
Auto™ application installed.
●
If this is not possible via Android Auto Wire-
less, the smartphone must be connected via
the USB connection with data transmission to
the infotainment system.
●
The USB cable used must be an original ca-
ble provided by the smartphone manufacturer.
Android Auto Wireless: Bluetooth® and WLAN
(Wi-Fi) also have to be active on the smart-
phone.
Establish connection
When you rst connect a smartphone, follow
the instructions on the infotainment system
screen and on the smartphone.
The requirements must be met to use Android
Auto™.
Launch Android Auto™:
●
Press HOME > Full Link to access the Full
Link main menu.
●
Press Android Auto™ to establish a connec-
tion with the smartphone.
Disconnecting
●
In Android Auto™ mode, press the /Exit
icon to access the Full Link main menu.
●
Press to interrupt the active connection.
Special characteristics
During an active Android Auto™ connection,
the following characteristics are applicable:
To Next Page
Loading...
