Cupra BORN 2022 - Infotainment system

Data transmissions
229
Full Link
●
An active Android Auto™ device can be con-
nected at the same time via Bluetooth® (HFP
prole) with the infotainment system.
●
It is possible to use the phone’s functions
through Android Auto™. If the Android Auto™
device is connected at the same time via Blue-
tooth® with the infotainment system, the tele-
phone function of the infotainment can also
be used.
●
An active Android Auto™ device cannot be
used as a media device in the Media main
menu.
●
It is not possible to use the built-in navigation
system and the Android Auto™ navigation sys-
tem at the same time. The last route started
interrupts the one that was previously active.
●
Telephone and Media data can be displayed
on the instrument cluster screen.
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
Voice control
●
Press briey to start voice control using
the infotainment system.
●
Press and hold this button to start voice
control (Google Assistant) on the connected
smartphone.
Note
●
The availability of technologies depends on
the country and may vary.
●
You will nd information about technical
requirements, compatible mobile phone de-
vices, certied applications and their availa-
bility on the CUPRA and Android Auto™ web-
sites, at specialised CUPRA dealerships or at
any SEAT dealership.
MirrorLink®
Requirements for MirrorLink®
In order to use MirrorLink®, the following re-
quirements must be met:
●
The mobile device must be compatible with
MirrorLink®.
●
The mobile phone device must be connec-
ted to the infotainment system via a USB con-
nection that is suitable for data transmission.
●
The USB cable used must be an original ca-
ble provided by the mobile phone device man-
ufacturer.
●
Depending on the mobile phone device
used, a Car-Mode application that is suitable
for using MirrorLink® must be installed.
Establish connection
When you rst connect a mobile phone de-
vice, follow the instructions on the infotain-
ment system screen and on the mobile phone
device.
The requirements must be met to use Mirror-
Link®.
Start MirrorLink®:
●
Press HOME > Full Link to access the
Full Link main menu.
●
Press MirrorLink to connect to the mobile
device.
Disconnecting
●
In MirrorLink® mode, press APP to access
the Full Link main menu.
●
Press to interrupt the active connection.
Special characteristics
During an active MirrorLink® connection, the
following characteristics are applicable:
●
An active MirrorLink® device can be connec-
ted to the infotainment system at the same
time via Bluetooth®.
●
If the MirrorLink® device is connected to the
infotainment system via Bluetooth®, the tele-
phone function of the infotainment system can
be used.
●
You cannot use an active MirrorLink® device
as a media device in the Media main menu.