Functions in the additional window:
Add a destination to favourites.
Learn usage pattern
When the vehicle is in motion, navigation saves
routes and destinations used to automatically
generate destination proposals. Destinations
are learned based on the time of day and the
day of the week.
Navigation can propose up to 5 routes at the
same time. The proposed routes may be dier-
ent from the routes of the normal route guid-
ance.
If one of the proposed destinations is selected,
the guide to that destination is started.
The route guidance follows the selected route
until the vehicle deviates from it. In that case,
the route is recalculated and takes you back
along the most direct path to the initially selec-
ted destination.
Important traic jams are taken into account
in the route guidance, and are avoided if alter-
native routes are available, provided navigation
has such data.
You can activate and deactivate the function
whenever you want.
Enable and disable learning usage pattern
The setting is in the corresponding navigation
menu > Basic function settings.
●
To activate the function, activate Learn us-
age pattern.
●
To disable the function, disable Learn usage
pattern.
●
To delete saved data, press Delete usage
pattern.
360° operating range display
The 360° operating range display shows the
possible range with the current charge level of
the high voltage battery.
Switch on the 360° operating range display
●
Open the additional map window and press
the symbol .
To deactivate the 360° range display, select:
Navigation menu > Range > Deactivate.
Note
●
If the battery charge level is very low,
the range indicator is automatically hidden.
When the battery is recharged, the range in-
dicator is displayed again.
●
If necessary, adapt the map view to display
the full range on the map.
To Next Page
Loading...
