Cupra BORN 2022 - Technical Data; Indications about the Technical Data

332
Technical data
Technical data
Indications about the
technical data
Vehicle identication data
The values indicated in the technical data may
dier depending on optional equipment or
version of the model, as well as in the case
of special vehicles and equipment for certain
countries.
The information in the oicial vehicle docu-
mentation takes precedence at all times.
Vehicle ID number
Depending on the version you can nd the
frame number in the following places:
●
In the infotainment system using the func-
tion button > Vehicle > Interior > Instru-
ment cluster > Service.
●
Front, visible through the small window on
the lower left side of the windscreen.
●
Behind the front right seat, under the oor
covering.
●
One the vehicle's data label.
●
On the right in the front compartment.
Type plate
The type plate is located on the vehicle’s right
hand door frame. Vehicles for certain export
countries do not have a type plate.
Performance
The values apply only to optimal road and
weather conditions.
The vehicle’s performance has been calcula-
ted without any equipment that would aect it,
e.g. accessories.
Weights
The kerb weight values apply to the vehicle
as ready to drive with a driver (75kg), oper-
ating uids and, if applicable, tools and the
spare wheel. The kerb weight increases with
optional equipment and retrotting of acces-
sories, which reduces the possible payload ac-
cordingly.
WARNING
The values indicated for the maximum per-
mitted weights must not be exceeded. There
is a risk of accident and damage!