Cupra BORN 2022 - Charging with a home energy management system

High-voltage battery
81
Charging settings
Conguration in the Settings menu
Open the General charging settings menu
1. Press the e-Manager function button in
the vehicle settings ›››page35.
2. Press the ›››Fig.74
6
button.
Settings in unknown locations
●
Reduce the AC charging power: the charging
current is reduced to 6 or 8 amps, depending
on the country. With this setting you can re-
duce the mains overload when charging at a
socket.
●
Release the AC power cable: After the charg-
ing process is complete, the connector relea-
ses automatically.
Battery Care Mode function
The function automatically limits the maxi-
mum charge level to 80% for subsequent
charges.
Note
●
The programmed charge setting overrides
the Battery Care setting (the maximum
charge level is not automatically reset).
●
CUPRA recommends using the Battery
Care Mode function in daily use to prolong
the life of the high-voltage battery.
Plug & Charge function
The vehicle battery is authenticated and the
charging process starts automatically at a suit-
able home or public charging station, as soon
as the charging cable is plugged in.
No manual identication is required to start
the charging process or to make payment. The
function depends on the equipment and the
country.
Prerequisites:
●
The charging station supports the Plug &
Charge function in accordance with ISO 15118.
●
A mobility service provider (MSP) energy
contract has been installed using the MyCU-
PRAapp.
In order to change the contract installation,
the main user must be logged into the vehicle.
●
Before charging with Plug & Charge, the pri-
vacy mode must be deactivated. The vehicle
has active data transmission and localization
›››page223.
●
Plug & Charge has been activated in the Info-
tainment system.
●
My CUPRA contract.
Note
If you have any questions about My CUPRA,
please contact CUPRA customer services
›››page222.
The function can be used by a main user and a
guest user of the My CUPRA service. The main
user can activate and deactivate the function
in the vehicle.
To delete the functionality and all Plug &
Charge data, you must reset the vehicle to fac-
tory settings ›››page237.
Set the battery charging limits
The infotainment system can be used to adjust
the maximum and minimum charge level and
thus the vehicle’s range to suit daily needs.
Maximum battery charging level
Normally, if you use the vehicle regularly, it is
not necessary to fully charge the high-voltage
battery. The maximum charging level limits the
battery's maximum state of charge.
●
Move the touch slider to the desired value
in the infotainment system's charging settings
›››page80.
The maximum charging level can also be adap-
ted during charging.
Minimum charging level of the battery
The minimum charging level sets the minimum
state of charge for a saved routine. This func-
tion can be used to guarantee a minimum
range.