Fault display
If the red warning light
4
ashes or turns on
without one of the indicator lamps ›››Fig.77
1
,
2
or
3
also turning on continuously on
the status indicator, there is a fault.
Display ›››Fig.77
Meaning
1
ashing,
4
on
or ashing
Failure in the power
supply.
2
ashing,
4
on
or ashing
Failure in the protection
device.
3
ashing,
4
on
or ashing
Failure in the vehicle.
The charging process pauses or is cancelled.
●
Check the instructions located on the back
of the protective devices.
●
Seek professional assistance if the fault per-
sists.
Note
If there is any other mains connection dur-
ing the charging process, or if the vehicle is
right next to the high voltage cables, charg-
ing from an electrical socket is not possible in
some cases. Additional mains connections:
●
Connecting a 12 volt battery charger.
●
Contact with a work tool connect to the
mains, such as a vehicle lift.
To Next Page
Loading...
