Cupra BORN 2024 - Page 137

Air conditioning
135
Heating, ventilation and cooling
Temperature

Climatronic control
Fig.102 Schematic representation: air-
conditioning functions.
A
Climabar
Fixed bar at the bottom of the Infotainment
System display ›››Fig.102
A
where the fol-
lowing Air Conditioning functions are located:
Tapping on the numbers them-
selves opens a pop-up window for tem-
perature settings using the symbols or
.
OR: use the touch zones
1
and
2
(blue /
red) to adjust the temperature of the Air
Conditioning ›››Fig.102.
Click on the symbol to change the heat
setting. To turn o the heating, press
the button until the light level is o. It
can also be controlled via the main Seats
menu ›››page139.
OR: the seat heating can be controlled by
tapping with two ngers at once on touch
zones
1
(for driver) and
2
(for passen-
ger) (depending on the equipment).
The defrost/demist function of the Cli-
matronic removes ice and condensation
from the windscreen. The air is dehu-
midied and the fan is set to high.
This function is also available on the light
control.
Press this to access the Air Condition-
ing menu ›››page136.
Switches the heated window on or o
when the drive system is switched on.
It switches o automatically after a maxi-
mum of 10 minutes. It should be switched
o as soon as the glass is demisted. To
avoid possible damage to the battery,
this function may temporarily disconnect
automatically and come back on when
normal operating conditions are re-estab-
lished.
This function is also available on the light
control.
Favourites (depending on the equipment)
With the exception of temperatures, seat
heating, , and , all other buttons on
the Climabar are customisable:
1. Press and hold the button that you want to
congure. A box showing all the possible
options drops down.
2. Select one of these options. The button
will be congured with this option.
3. Close the box to return to the infotainment
menu.