Cupra BORN 2024 - Page 142

140
Air conditioning
the case of the driver, the function can be per-
sonalised, depending on the user registered in
the vehicle.
To access the smart heated seats function,
the CUPRA CONNECT personalisation service
must rst be activated ›››page238.
●
To activate/deactivate the function go to the
seat heating submenu, and press on the Auto-
matic heating button below the image of the
corresponding seat.
The smart heated seats function requires a pe-
riod for learning usage habits. The start of the
learning process is indicated by the informative
text Learning 0% which will appear above
the function's activation/deactivation button.
During this process, the learning percentage
increase will be shown in this informative text,
until 100% learning is achieved.
Seat heating level 3 (maximum) needs to be
used to ensure that habits are learned cor-
rectly.
During the learning period, it is advisable to
use the seat heater at dierent outside tem-
peratures to achieve optimal performance of
the smart heated seats.
The system will not learn about the use of the
seat heating if it is used straight after using the
seat heating with stationary air conditioning.
Once 100% learning has been achieved, au-
tomatic mode will activate. This mode is also
represented by an A next to the corresponding
seat button on the air conditioning bar, which
is always visible at the bottom of the screen.
The heating can be congured at any time. If
the automatic mode is activated, the text Op-
timising is displayed and the automatic mode
will take into account this new conguration
or modication that the user has made to the
seat heating (e.g. changing the heat setting,
etc.).
To reset the process and start the learning
period, go to the submenu Settings > Reset
driver / front passenger prole.
Tap to access information about the func-
tion.
Cases in which heat seating should not be
switched on
Do not switch seat heating on if any of the
following conditions are met:
●
The seat is occupied by a person with limited
perception of pain or temperature.
●
The seat is not occupied.
●
The seat has a cover.
●
A child seat has been installed on the seat.
●
The seat cushion is wet or damp.
●
The outdoor or vehicle interior temperature
is higher than +25°C (77°F).
WARNING
People who cannot perceive pain or temper-
ature because of medications, paralysis or
chronic diseases (e.g. diabetes) or have a
limited perception of these, may suer burns
to the back, buttocks or legs when using seat
heating.
●
People with limited pain and temperature
thresholds must never use seat heating.
●
If an abnormality in the device's tempera-
ture control is detected, have it checked by a
specialist workshop.
WARNING
If the fabric of the cushion is wet, this can ad-
versely aect the operation of the seat heat-
ing, increasing the risk of burns.
●
Make sure the seat cushion is dry prior to
using the seat heater.
●
Do not sit on the seat with clothing that is
wet or damp.
●
Do not leave clothing that is wet or damp
on the seat.
●
Do not spill liquids on the seat.