Cupra BORN 2024 - Page 145

Air conditioning
143
Stationary air conditioning
Immediately air condition the parked vehicle
(only if the driver is inside the vehicle)
●
Switch the ignition o.
●
Press in the Infotainment system’s depar-
ture menu ›››page36.
The vehicle will be air-conditioned for approx.
30 minutes. The function switches o auto-
matically. For this to work, the drive system
should not be switched on.
The vehicle can also be air-conditioned before
a desired departure time ›››page143.
Immediately air condition a parked vehicle
(only if the driver is not in the vehicle)
●
Press the immediate on icon in the Info-
tainment system without turning on the vehi-
cle’s ignition.
Setting the desired temperature
●
Open the infotainment system’s Stationary
air conditioning menu.
●
Tap Air conditioning.
●
Set the desired temperature using and .
Switching o the stationary air conditioning
●
Connect the drive system.
●
EITHER: Press the immediate on/o button
in the mobile App or on the MyCUPRA website.
●
EITHER:
Press the immediate on/o icon in
the infotainment system (while the vehicle is
switched o). It is only possible to switch it o if
the stationary air conditioning was switched on
using this button.
●
EITHER: Press the air conditioning o button
in the Air conditioning menu of the infotain-
ment system (while the vehicle is o).
The stationary air conditioning switches o
automatically
●
After approx. 30minutes if the vehicle is air-
conditioned by “Air condition now” with the
ignition switched o.
●
After approx. 15minutes if the drive system
has not been switched on by one hour after
the scheduled departure time.
●
When the state of charge of the high voltage
battery drops excessively.
Note
Noises will be heard while the stationary air
conditioning is running.
Programming the stationary air
conditioning
The stationary air conditioning can be pro-
grammed in the Infotainment system for a
scheduled departure time. You can set the de-
sired temperature of the vehicle interior for the
vehicle’s planned departure time.
Based on the desired temperature, the vehicle
calculates the time that the stationary air con-
ditioning needs to be switched on to reach this
temperature by the departure time. The maxi-
mum pre-operation time of the stationary air
conditioning is approx. 30 minutes before the
departure time.
Air conditioning the vehicle for departure
●
Open the Stationary air conditioning menu.
●
Press Departure to open the timer menu.
●
Set the scheduled departure time.
●
Activate the timer using the checkbox.
The earliest scheduled departure time is dis-
played in the infotainment system’s departure
menu, and can be switched on and o there
›››page36.
Stationary air conditioning with additional
electrical comfort consumers
If air conditioning for departure is to be used,
the electrical comfort consumers, such as seat
heating, steering wheel heating or the heated
rear window, can also be switched on automat-