ically before the departure time. The electri-
cal comfort consumers depend on the equip-
ment. They are only activated in low tempera-
ture conditions.
To enable the use of these consumers:
●
Open the Stationary air conditioning menu.
●
Tap Air conditioning.
●
Select the seats whose comfort consumers
should be connected along with the station-
ary air conditioning. Only these seats will be
heated before the departure time.
●
To turn on the window heating before the
departure time, activate the Automatic win-
dow heating function
The maximum pre-operation time of the elec-
trical comfort consumers is approx. 10 minutes
before the departure time.
If the air conditioning is switched on imme-
diately, the electrical comfort consumers are
also activated.
Air conditioning the vehicle during high-
voltage charging
If the vehicle’s high-voltage battery is to be
charged with alternating current (AC) or di-
rect current (DC), the vehicle can be air con-
ditioned before the scheduled departure time.
This can be set in the infotainment system, un-
der charging settings ›››page84.
Immediate activation of the rear window
heating
The heated windscreen can be switched on or
o using the My CUPRA App , whether or not
the stationary air conditioning is switched on.
Air-conditioning the vehicle after unlocking
it
●
Open the infotainment system’s Stationary
air conditioning menu.
●
Press .
●
Check the Air condition the vehicle after
unlocking check box by pressing it.
The vehicle will be air-conditioned for 5 mi-
nutes as soon as you unlock the vehicle door.
Check the schedule
When the ignition is switched o, the infotain-
ment system displays the next time that is ac-
tive and the set functions.
To Next Page
Loading...
