WARNING
●
When the ignition is switched on, the sta-
tus of the brake system and the brake as-
sist functions are automatically checked. The
control lamps on the instrument cluster light
up briey and then go out. Any indicator
lamp that remains on indicates a fault. Seek
qualied technical assistance immediately.
●
If the brake system warning light comes
on together with the control lamp, the ABS
regulation function may not work and the
rear wheels may lock relatively quickly when
braking. This can lead to loss of control of
the vehicle! If possible, slow down and drive
slowly and carefully to the nearest specialist
workshop to have the brake system inspec-
ted. During this journey, avoid heavy braking
and any sudden manoeuvres.
●
If the indicator lamp does not go out,
or comes on while driving, it means that the
ABS function cannot work properly, is not
available and will not work during braking.
Go to a specialised workshop as soon as pos-
sible.
To Next Page
Loading...
