Cupra BORN 2024 - Page 180

178
Assistant systems
WARNING
If the message ACC ready to start is displayed
on the instrument cluster display and the
vehicle in front moves o, your vehicle will
move o automatically. In this case, any ob-
stacles in the road may not be detected. This
may cause serious accidents and injuries.
●
Always check the road before moving o,
and apply the vehicle brakes yourself if nec-
essary.
ACC system limitations
The limits of the ACC system mean that it is not
appropriate in all situations ››› in Introduc-
tion on page174.
CUPRA does not recommend using the func-
tion in the following cases ››› :
●
Heavy rain, snow or fog.
●
When going through tunnels.
●
On stretches of road with roadworks.
●
On routes with curves, e.g. on mountain
roads.
●
On o-road routes.
●
In covered car parks.
●
On roads with embedded metal objects such
as train or tram tracks.
●
On roads with loose gravel.
Pay special attention when using ACC in the
following situations:
On curves
Fig.120 Vehicle on a bend.
The ACC may not detect the vehicle in front
on a curve, or may regulate the distance from
vehicles in other lanes ›››Fig.120.
Vehicles outside the sensor zone
Fig.121 Motorcyclist ahead out of range of
the radar sensor.
Fig.122
Vehicle changing lanes.
In the following situations the ACC may not
react, or may react slowly or inappropriately:
●
Vehicles that are not aligned while driving or
that are outside the sensor's detection area,
such as motorcycles ›››Fig.121.
●
Vehicles that move into your lane, a short
distance from your vehicle ›››Fig.122.
●
Vehicles with loads or accessories that pro-
trude from the sides, rear or roof.