Driver attention monitor.
Introduction
Fig.6 On the instrument cluster screen:
Driver attention monitor symbol.
The driver attention monitor informs the
driver whether his or her driving behaviour
is indicative of a lack of attention based on
the vehicle's operating inputs.
The driver attention monitor assesses the ve-
hicle's operating inputs to determine whether
the driver is distracted. If the system detects
that the driver is distracted, it indicates this on
the screen of the instrument cluster by a con-
trol or warning lamp in combination with a sup-
plementary text message. Depending on the
conguration, it also emits an audible warning
›››page25. The text message on the instru-
ment cluster screen is displayed for 4 to 6 sec-
onds.
Operating conditions
Driving behaviour is only assessed when the
speed is higher than 10 km/h.
WARNING
The driver attention monitor cannot be a
substitute for the driver's attention and only
works within the limits of the system. There-
fore, the driver attention monitor may not be
able to detect whether the driver is paying
attention in all situations and may not react
or may react with a delay or in an unwanted
manner. There is a risk of accidents and seri-
ous or even fatal injuries.
●
Always pay proper attention and do not rely
solely on the system. The driver is responsi-
ble for his or her tness to drive at all times.
●
Note the limits of the system
›››page24.
●
Avoid being distracted while driving.
●
Adjust the vehicle's personal settings be-
fore starting the journey.
●
Follow the information on the instrument
cluster screen and respond as prompted.
›››page25.
Note
In the event of a fault, have the system
checked by a qualied workshop. CUPRA
recommends that you visit an oicial dealer.
System limits
aecting the driver
attention monitor
The driver attention monitor has system rela-
ted limitations. The following conditions may
limit the operation of the driver attention mon-
itor or prevent it from operating at all:
●
Speeds below 10 km/h.
●
Severe driver distraction due to external in-
uences such as traic.
●
Severe driver distraction due to actions not
related to the vehicle (for example, using a
mobile device).
Driving with the driver attention
monitor
Connection and disconnection
You can switch the driver attention monitor on
and o manually.
In the infotainment system:
1. Open the Assistance systems menu.
2. Switch the driver attention monitor on
or o in the corresponding submenu
›››page33.
Note
If the function was manually switched o
during the last journey, this setting will stay
the same when the vehicle is started again.