Cupra BORN 2024 - Variable Luggage Compartment Floor

Storing objects
283
Luggage compartment
Luggage compartment oor
Fig.163 In the luggage compartment:
luggage compartment oor.
The rear of the luggage compartment oor
can be folded forward ›››Fig.163. Under-
neath, there is a storage compartment for
items such as on-board tools ›››page287.
NOTICE
Incorrect use of the luggage compartment
oor can cause damage to it or the luggage
compartment trim.
●
When closing the luggage compartment
oor, always guide it carefully downwards
without dropping it.
●
As far as possible, always spread the load
over the entire surface of the luggage com-
partment to avoid overloading any one spot.
Variable luggage compartment
oor
Fig.164 In the luggage compartment:
open the second luggage compartment
oor.
Fig.165 In the luggage compartment:
attach the second luggage compartment
oor.
Depending on the equipment, the vehicle may
have a second oor in the luggage compart-
ment.
Opening and closing the second luggage
compartment oor
●
To open it, grasp the handle ›››Fig.164
1
and fold the rear of the luggage compartment
oor forwards in the direction of the arrow.
●
To close it, fold out the luggage compart-
ment oor and set it down carefully ›››
.
Fixing the second luggage compartment
oor parallel to the rear seat backrest
●
Fold the rear of the luggage compartment
oor forwards.
●
Once folded, lift it up and insert it into the
side brackets, with the open side facing down-
wards ›››Fig.165 (enlarged image).
Placing the second luggage compartment
oor in a lower position
●
Fold the rear of the luggage compartment
oor forwards.
●
Once folded, pull the luggage compartment
oor backwards along the side guides and put
it in place lower.