EasyManua.ls Logo

Cupra BORN 2024 - Interior Cleaning

Cupra BORN 2024
370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
334
Maintenance
1)
Neutral soap solution: maximum of two tablespoons in 1 l of water.
Covers / Trims
Dirt: Neutral soap solution
1)
, if a ne steel
cleaning product is required.
Paint
Paint aws: Check the paint's colour code at
an authorised service and restore with a touch-
up pencil.
Spilled fuel: Immediately rinse with water.
Environmental rust deposit: Apply rust re-
mover and then apply hard wax. Go you your
specialised workshop if you have any queries.
Corrosion: Have your specialised workshop
take care of this.
Water does not form droplets on the clean
paint: Maintain with hard wax (at least twice a
year).
No shine despitemaintenance/unattractive
paint: Treat with suitable wax and apply paint
preservative afterwards if the wax used does
not contain preservative ingredients.
Tanks, e.g. insect remains, bird droppings,
tree sap, road salt: Immediately soak with water
and remove with a microbre cloth.
Grease-based dirt, e.g. cosmetic products or
sunscreen: Remove immediately with a neutral
soap solution
1)
and a soft cloth.
Carbon bre parts
Dirt: Clean in the same way as painted parts
›››page332.
Decorative laminates
Dirt: Soft sponge with neutral soap solution
1)
.
Interior cleaning
Below can be found some recommendations
on the cleaning and upkeep of individual vehi-
cle components.
Go to your specialised workshop if you have
special questions or parts that are not listed.
Take the general considerations into account
›››page335, Take special care with....
Windows
Dirt: Apply windscreen cleaner and then dry
with a cloth.
Covers / Trims
Dirt: Neutral soap solution
1)
.
Plastic parts
Dirt: Damp cloth.
Encrusted dirt: Neutral soap solution
1)
, if pos-
sible a solvent-free plastic cleaning product.
Displays/instrument cluster
Dirt: Soft cloth with a liquid crystal display
cleaner.
Control panels
Dirt: Soft brush, then a soft cloth with a neu-
tral soap solution
1)
.
Seat belts
Dirt: Neutral soap solution
1)
, allowed to dry
before retracting.
Fabrics, articial, Alcantara leather
Particles of dirt stuck to surfaces: Vacuum
cleaner.
Water-based dirt, e.g. coee, tea, blood etc.:
Absorbent cloth and neutral soap solution
1)
.
Grease-based dirt, e.g. oil, make-up, etc.:
Apply a neutral soap solution
1)
. Absorb the dis-
solved grease and paint particles by dryingwith
an absorbent cloth, if you have to treat it with
water afterwards.
Special dirt, e.g. pens, nail polish, spray paint,
shoe polish, etc.: Special stain remover: dry
with an absorbent cloth, if applicable, apply
neutral soap solution afterwards
1)
.

Table of Contents

Related product manuals