EasyManua.ls Logo

Cupra BORN 2024 - Accessories, Spare Parts and Repair Work

Cupra BORN 2024
370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
336
Maintenance
Make sure that the instrument panel is
switched o and cooled down before cleaning.
Make sure that no liquid leaks between the
instrument panel and the trim. Risk of damage!
Control panels
Make sure that no liquid leaks into the con-
trol panels. Risk of damage!
Seat belts
Do not remove the seat belts to clean them.
Seat belts and their components must never
be cleaned with chemical products, nor should
they be allowed to come into contact with cor-
rosive liquids, solvents or sharp objects. Risk of
damaging the fabric!
If you nd any damage to the belt webbing,
belt ttings, the belt retractor or the buckle,
ask your specialised workshop to replace the
belt in question.
Fabrics/articial leather/microbre
Do not treat articial leather/microbre with
leather cleaning products, solvents, wax polish,
shoe cream, stain removers or similar prod-
ucts.
If the stain is very hard to remove, take the
vehicle to a specialised workshop to have it
removed there. This will prevent damage.
Do not use steam cleaners, brushes, hard
sponges, etc. to clean.
Do not turn on seat heating to dry the seats.
Sharp objects on clothing, such as zips, rivets
or belts can damage the surface.
Open Velcro, e.g. on clothes can damage the
seat upholstery. Make sure that Velcro fasten-
ers are closed.
Natural leather
Never use solvents, wax polish, shoe cream,
spot removers or similar products on leather.
Sharp objects on clothing, such as zips, rivets
or belts can damage the surface.
Do not use steam cleaners, brushes, hard
sponges, etc. to clean.
Do not turn on seat heating to dry the seats.
Avoid exposing leather to direct sunlight for
long periods, otherwise it may tend to lose
some of its colour. If the car is left for a pro-
longed period in the bright sun, it is best to
cover the leather.
WARNING
Do not use water-repellent coatings on the
windscreen. In bad visibility conditions such
as humid weather, darkness or when the sun
is in its lowest point, visibility may be impac-
ted. Accident hazard! Such coatings can also
cause the windscreen wiper blades to make
noise.
Note
Remains of insects can be removed much
more easily with previously treated paint.
Regular car care treatments can prevent
deposits of ambient rust.
Taking your vehicle out of service
If you want to leave your vehicle stationary for a
long period of time, contact a qualied work-
shop. They will gladly inform you about the
necessary measures, such as anti-corrosion
protection, Service and storage.
Also take into account the indications relat-
ing to the vehicle’s battery ›››page308 ,
›››page308, Introduction.
Accessories, spare parts
and repair work
Introduction
Always ask your dealer or specialist retailer for
advice before purchasing accessories and re-
placement parts.
Your vehicle is designed to oer a high stand-
ard of active and passive safety. For this rea-
son, we recommend that you ask a specialised
CUPRA Service or SEAT Oicial Service for ad-
vice before tting accessories or replacement

Table of Contents

Related product manuals