Cupra BORN 2024 - Return and Scrapping of End-Of-Life Vehicles; Declaration of Conformity

346
User information
Product recycling
✓ Valid for market: Italy
Environmental labelling
Legislative decree no. 116 (3 September 2020),
which transposes EU Directive 2018/851 on
waste, and EU Directive 2018/852 on packag-
ing and packaging waste, states that all pack-
aging must be properly labelled to facilitate
the collection, reuse, recovery and recycling of
packaging, and to give users correct informa-
tion about the nal destination of the packag-
ing.
Information about the environmental labelling
of packaging present in the vehicle can be
accessed by scanning the following QR code,
which links to a website where the information
required by this regulation can be found:
Return and scrapping of
end-of-life vehicles
End-of-life return
At the end of its useful life, your vehicle must
be recycled and disposed of in an environmen-
tally sound manner. For this reason, nal vehi-
cle owners in the EU and in many other coun-
tries are required by law to take their vehicle to
an authorised collection point, vehicle return
centre or authorised dismantling facility.
CUPRA has already made the necessary ar-
rangements for this: an extensive network of
vehicle return centres is available throughout
the EU and in many other countries, where you
can drop o your vehicle. If you meet the na-
tional legal requirements, you can return your
end-of-life vehicle free of charge within the
EU.
The vehicle return centre issues a recycling
certicate which serves as proof that the end-
of-life vehicle has been recycled correctly.
Information about the Vehicle Return Centres
can be obtained from your CUPRA dealer.
Scrapping
The relevant safety requirements must be ob-
served when scrapping the vehicle or its in-
dividual components, e.g. airbag system and
seatbelt tensioners. Qualied workshops are
already familiar with these requirements. CU-
PRA recommends using a CUPRA dealer.
Declaration of conformity
Commercialisation of nished products on
the British market (England, Wales and Scot-
land):
The UKCA (UK Conformity Assessed)
marking is a new British marking used for
products commercialised in Great Britain
(England, Wales and Scotland).
Importer:
Volkswagen Group United Kingdom Ltd.
Yeomans Drive, Blakelands
Milton Keynes, MK 14 5AN
United Kingdom
Vehicles commercialised on the British market
by the importer mentioned above may include
complete products that comply with the fol-
lowing provisions:
●
The Electromagnetic Compatibility Regula-
tions, 2016
●
The Electrical Equipment (Safety) Regula-
tions, 2016
●
The Supply of Machinery (Safety) (Amend-
ment) Regulations, 2011
●
The Noise Emission in the Environment by
Equipment for use Outdoors Regulations, 2001
●
The Restriction of the Use of Certain Haz-
ardous Substances in Electrical and Electronic
Equipment Regulations, 2012