Cupra BORN 2024 - Page 63

Safety
61
Transporting children safely
1)
Not available in all markets/versions.
●
IB: Seat suitable for installing an ISOFIX forward-facing group 2/3 booster seat as well as an i-size forward-facing child seat for children with a height
of 100 to 150cm.
●
X: Position not suitable for ISOFIX or i-Size child restraint systems in this weight group or size class.
Securing the child seat with the ISOFIX or
i-Size system
Fig.36 Rear seat: location of the ISOFIX or
i-Size securing rings.
Fig.37 Front passenger seat: location of
the i-Size securing rings.
Fig.38 Rear seats: tting a child seat with
the ISOFIX system.
You must follow the child seat manufacturer's
instructions.
The location of the ISOFIX or i-Size anchor
points is indicated by a symbol ›››Fig.36 ,
›››Fig.37
1)
. In some vehicles, the rings are
secured to the seat frame and, in others, they
are secured to the rear oor.
●
If necessary, remove the protective caps
from the ISOFIX or i-Size anchor points.
●
Press the child seat onto the ISOFIX or iSize
securing rings until it is heard to engage se-
curely ›››Fig.38. If the child seat is equipped
with Top Tether anchor points, secure it to the
correspondent ring ›››page62. Follow the
child seat manufacturer’s instructions.
●
Pull on both sides of the child seat to ensure
that it is properly anchored.
Child seats with the ISOFIX or i-Size and Top
Tether attachment system can be purchased
from technical services.