Cupra BORN 2024 - Page 87

High-voltage battery
85
Charging settings
1. Open in the Charging menu ›››page83
2. Set the minimum charging level in the
schedule.
After connecting the electricity, rst of all the
vehicle charges up to the battery's minimum
charging level. The preferred times or a de-
parture time, for programmed charging, will
only be taken into account once this limit is
reached.
●
Maximum charging level
8
: Normally, if you
use the vehicle regularly, it is not necessary
to fully charge the high-voltage battery. The
maximum charging level limits the battery's
maximum state of charge.
1.
Drag the touch slider to the desired value in
the infotainment system's scheduling set-
tings ›››page83.
The maximum charging level can also be
adapted during charging.
Note
In the Charging menu it is possible to change
the maximum charging level at any time. The
minimum charging level can be changed in
the charging menu if you have selected a
schedule and are in the location for that
schedule.
Recommendations for charging with alter-
nating current (AC)
Use in everyday life:
●
A long range is not necessary.
–
Maximum battery charging level: 80%
maximum.
–
Minimum battery charging level: 20% as a
minimum if the outside temperature is mild
or warm, or 40% if it is cool or cold.
Long journeys:
●
A long range is necessary.
–
Maximum battery charging level: 100%.
–
Minimum battery charging level: 20% as a
minimum if the outside temperature is mild
or warm, or 40% if it is cool or cold.
Note
Avoid leaving the vehicle parked and start
driving immediately after fully charging the
battery.
Advanced options
●
Reducing the alternating current (AC) charg-
ing power: This reduces the charging current
to between 6 and 8 amps to avoid overloading
the household power network.
●
Unlocking the alternating current (AC) cable:
Once the charging process is complete, the
connector is automatically unlocked.
Air conditioning
The vehicle interior can be heated or cooled
for the congured departure time (depending
on the equipment).
Set the desired temperature in the Stationary
air conditioning ›››page142 menu.
●
Select the Charge and air conditioning
prior to departure function from the drop-
down list of charging modes.
Note
In the departure menu, you can also select
the charging mode you want to use for the
active schedule ›››page36.
Conguration in the Settings menu
Open the General charging settings menu
1. Open the main Charging menu.
2. Push the
4
›››Fig.63 button.
Settings in unknown locations
●
Reduce the AC charging power: the charg-
ing current is reduced to 6 or 8 amps depend-
ing on the country. With this setting you can
reduce mains overload when charging at a
socket.
●
Release the AC power cable: After the charg-
ing process is complete, the connector relea-
ses automatically.