Cupra FORMENTOR 2024 - Page 153

Air conditioning
151
Heating, ventilation and cooling
optimise the function. The optimisation proc-
ess will be displayed in the seats submenu of
the infotainment display (Optimizing).
To reset the process and start the learning
period, go to the submenu Settings > Reset
driver / front passenger prole.
Cases in which heat seating should not be
switched on
Do not switch seat heating on if any of the
following conditions are met:
●
The seat is occupied by a person with limited
perception of pain or temperature.
●
The seat is not occupied.
●
The seat has a cover.
●
A child seat has been installed on the seat.
●
The seat cushion is wet or damp.
●
The outdoor or indoor temperature is higher
than +25°C (77°F).
WARNING
People who cannot perceive pain or temper-
ature because of medications, paralysis or
chronic diseases (e.g. diabetes) or have a
limited perception of these, may suer burns
to the back, buttocks or legs when using seat
heating.
●
People with limited pain and temperature
thresholds must never use seat heating.
●
If an abnormality in the device's tempera-
ture control is detected, have it checked by a
specialist workshop.
WARNING
If the fabric of the cushion is wet, this can ad-
versely aect the operation of the seat heat-
ing, increasing the risk of burns.
●
Make sure the seat cushion is dry prior to
using the seat heater.
●
Do not sit on the seat with clothing that is
wet or damp.
●
Do not leave clothing that is wet or damp
on the seat.
●
Do not spill liquids on the seat.
NOTICE
●
To avoid damaging the heating elements of
the seat heaters, please do not kneel on the
seat or apply sharp pressure to a single point
on the seat cushion or backrest.
●
Liquids, sharps objects and insulating ma-
terials (e.g. covers or child seats) can damage
the seat heating.
●
In the event of odours, switch o seat heat-
ing immediately and have it inspected by a
specialised workshop.
●
If the original seat upholstery is replaced by
another material, seat heating may overheat
or its operation may be limited.
For the sake of the environment
Seat heating should remain on only when
needed. Otherwise, it is unnecessary energy
consumption.
Note
Please note the following for the smart
heated seats feature:
●
The system may reset the learning process
if it has not been satisfactory.
●
Separate driver’s seat learning will be re-
quired for each registered user.
●
The passenger seat learns regardless of the
active registered user.