EasyManua.ls Logo

Cupra FORMENTOR 2024 - Operating Mode Selection

Cupra FORMENTOR 2024
424 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
172
Driving
1)
The displayed symbol varies depending on the active operating mode and the charge level of the high-voltage battery.
Operating mode selection
Operating mode selection
Valid for: hybrid vehicles
Fig.120 In the infotainment system: Battery
manager menu
The vehicle has dierent operating modes so
that it can always be optimally adjusted to ev-
ery situation while driving. Once the drive sys-
tem has been turned on, and provided that all
of the operating conditions required for this
purpose have been met, the Electric mode
operating mode is always activated in the rst
instance for electric driving.
Operating mode selection
Switch on the drive system.
Access the Battery manager menu of the
infotainment system ( > Charging > Battery
manager ›››page87).
Select Electric Mode or Hybrid Mode in
the infotainment system. Further information
about the operating mode can be found in
›››Fig.120
4
.
Electric mode (driving in electric mode)
1)
In electric mode, the vehicle basically drives in
electric only mode. To the extent possible, the
vehicle's combustion engine is not used.
All of the following conditions must be met for
the Electric mode to be activated:

Table of Contents

Related product manuals