1)
The RVC button will only be displayed when reverse gear is engaged.
●
The volume and tone of the signals and
indications can be changed.
●
Please observe information on towing a
trailer.
Operating Park Assist Plus
Switching on and o manually
●
Press button in the infotainment system
( > Driver assist > Parking Assistants >
Parking Assist).
Automatic activation
●
Select reverse gear.
●
OR: if you drive forward at a speed of less
than 15 km/h (9 mph) and you encounter an
obstacle, it is detected when it is optically ap-
prox. less than 95 cm. away, or acoustically ap-
prox. 50 cm. away. If the automatic connection
is activated, a reduced display is shown.
●
OR: if the vehicle moves back a certain dis-
tance (between approx. 10 and 20 cm approx
depending on whether or not an obstacle is
detected).
When the Park Assist Plus connects automat-
ically, a diagram of the vehicle and the seg-
ments will appear on screen. This function will
be available unless the user has deactivated it.
It only operates every time the speed drops
below 15 km/h (9 mph) for the rst time.
Automatic activation of park assist can be
switched on and o in the infotainment sys-
tem:
●
Switch the ignition on.
●
In the infotainment system select > Assis-
tants > Parking > Park Assist.
●
Check the Automatic activation box.
If activated automatically, an audible sound
warning will only be given when obstacles in
front are at a distance of less than 50 cm. ap-
prox.
If it is switched o using the button in the
infotainment system, one of the following ac-
tions must be taken for it to reactivate auto-
matically:
●
Switch o the ignition and switch it on again.
●
EITHER: drive forward at over approx.
15km/h (9mph).
●
OR: activate or deactivate the parking lock
button P.
●
OR: switch the automatic activation on and
o in the Infotainment system.
Automatic disconnection
●
Drive forward at 15 km/h (9mph) or faster.
●
OR: press the parking lock button P.
Temporary sound suppression
●
Press the function button on the infotain-
ment screen.
●
OR: activate the electronic parking brake.
Change from reduced view to full view
●
Engage the reverse gear if your vehicle is
equipped with a reversing camera.
●
Press the car icon on the reduced view
●
OR: if the vehicle moves back a certain dis-
tance (between approx. 10 and 20 cm approx
depending on whether or not an obstacle is
detected).
Switch to the reverse assist image (Rear View
Camera “RVC”)
●
Select reverse gear.
●
OR: press the RVC button on the Infotain-
ment System screen.
1)
A short conrmation signal will be heard and
the button symbol will light up when the sys-
tem is switched on.
NOTICE
Park assist plus only connects automatically
when driving very slowly. If driving style is not
adapted to the circumstances, an accident
and serious injury or damage may be caused.