Cupra FORMENTOR 2024 - Page 260

258
Data transmissions
●
A primary user is available. You may need to
register as a primary user.
●
The vehicle is located in an area with sui-
cient mobile reception.
●
Your current privacy conguration allows you
to transmit and receive data and information
›››page264.
●
The vehicle's 12-volt battery is properly
charged.
Download and install an over-the-
air update
Download costs
Over-the-air updates are downloaded via the
factory control unit with eSIM card, and are
free of charge. CUPRA covers the cost of the
connection.
Download timing
Downloading takes place automatically with-
out warning and may also happen while driv-
ing. When the download is complete, a mes-
sage will appear to inform you that an over-
the-air update is available.
Note
The duration of the download process de-
pends on the quality of the network, the le
size and the type of update. The download
process may be interrupted. It will resume
when the ignition is switched on again.
Software installation pre-requisites
●
The vehicle is parked safely in accordance
with legal requirements and local regulations
›››page226.
●
Previous over-the-air updates have been in-
stalled.
Installing the software from an over-the-air
update
Choose a time for the over-the-air update
when neither you nor others are unlikely to be
driving the vehicle.
WARNING
The control units will be switched o and will
not work while the software installation is in
progress. Driving while the control units are
switched o or faulty can lead to accidents
and fatal injuries.
●
Install the software in a way that does not
interfere with other road users.
●
Do not use the vehicle during a software
installation procedure.
1. Deactivate the vehicle's drive system and
apply the electronic parking brake.
2. Close the bonnet, boot, all windows and all
doors.
3.
Conrm the software installation in the In-
fotainment system.
4. Ensure that all occupants of the vehicle
get out and that there are no animals left
inside.
5. Collect all vehicle keys and get out.
6. Lock the vehicle.
Functional restrictions during software in-
stallation
The control units, central computer, functions
and displays will not be available during the
software installation. Do not use the vehicle or
the Infotainment system during installation.
●
The system prevents the activation of the ve-
hicle's drive system.
●
The high-voltage battery is not charged.
●
The AUX-IN diagnostic socket is switched
o.
●
The anti-theft alarm is switched o.
●
The “Safe” security system is switched o.
After installing the software
After the software installation and before acti-
vating the vehicle's drive system, read the mes-
sage on the Infotainment system or in the In-
strument cluster about the complete installa-
tion of the software. It can take up to 1 minute
for the vehicle to display the status of the over-
the-air update.