Cupra FORMENTOR 2024 - Configure Internet Access; Full Link

Data transmissions
265
Full Link
●
Activate the wireless network (WLAN) on the
device that is to be connected. If necessary,
refer to the manufacturer’s instruction manual.
●
Activate the mobile device assignment in
the infotainment system. To do this, press the
function button Use as hotspot and check the
checkbox.
●
Enter and conrm the network key displayed
on the device.
The following adjustments can also be made in
the Infotainment system as hotspot menu:
●
Network key: Network key generated auto-
matically. Press the function button to change
the network key manually. The network key
must have at least 12 characters and a maxi-
mum of 62.
●
SSID: Name of the WLAN network (maxi-
mum 32 characters).
The WLAN (wireless) connection is estab-
lished. To complete the connection, it may be
necessary to enter other data into the device.
Repeat this process to connect other devices.
There is also the option of scanning the QR
code to connect the device directly to the
infotainment system’s Wi-Fi network without
having to enter the password: select Settings >
Network > Quick connection to infotainment
system.
Congure
Internet access
The infotainment system can use the WLAN
hotspot of an external device to establish an
Internet connection.
Establishing the connection with the wire-
less network (WLAN)
●
Activate and share a wireless hotspot with
Internet on the external device. Refer to the
manufacturer’s instruction manual.
●
Press the HOME > button.
●
Tap the menu Settings > Network > Wi-Fi >
Wi-Fi and tick the verication box.
●
Press the Search for Wi-Fi button and select
the device you want from the list.
●
If necessary, enter the network key of the
device in the infotainment system and conrm
with OK.
Manual settings:
●
To manually enter the network settings of an
external (WLAN) device.
The WLAN (wireless) connection is estab-
lished. To complete the connection, it may be
necessary to enter other data into the device.
Note
Due to the large number of devices on the
market, it is not possible to guarantee fault-
free operation of all functions.
Full Link
Introduction
With Full Link it is possible to view and use
the contents and functions that are shown on
the mobile phone device on the infotainment
screen.
To do this, the mobile phone device must
be connected with the infotainment system
through a USB interface.
Some technologies can also be used by Wire-
less Full Link through the Bluetooth® interface
and a Wi-Fi connection.
The following technologies may be available:
●
Apple CarPlay™
●
Apple CarPlay™ Wireless
●
Android Auto™
●
Android Auto™ Wireless
The availability of the technologies that Full
Link includes depends on the country and the
mobile phone device used.
You can nd more information on the CUPRA
website (www.cupraoicial.com).
Access the Full Link main menu
Browsing the Full Link main menu depends on
the infotainment system used.
●
Press Home > Full Link