Cupra FORMENTOR 2024 - Page 269

Data transmissions
267
Full Link
Applications, their use and the necessary mo-
bile phone connection may be pay per use.
The oer of applications can be varied and de-
signed for a vehicle or a specic country. The
content and volume of applications, as well
as the companies that oer them, may vary.
Some applications also depend on the availa-
bility of third-party services.
It cannot be guaranteed that all the applica-
tions oered will work on all mobile phone de-
vices or with all their operating systems.
The applications oered by CUPRA can be
modied, cancelled, deactivated, reactivated
and extended without prior notication.
To avoid distracting the driver while driving,
only certied applications can be used.
Full Link symbols and settings
To show more information.
To select Apple CarPlay technology.
To select Android Auto™ technology.
Apple CarPlay™
In order to use Apple CarPlay™, the following
requirements must be met:
●
The iPhone™ must be compatible with Ap-
ple CarPlay™.
●
Voice control (Siri ™) must be active on the
iPhone™.
●
Apple CarPlay™
must be active without limi-
tations in the iPhone™ settings.
●
If this is not possible via Apple CarPlay™
Wireless, the iPhone™ must be connected to
the infotainment system via a USB connection.
Only USB connections with data transmission
are suitable for the use of Apple CarPlay™.
●
The USB cable used must be an original Ap-
ple™ cable.
Apple CarPlay™ Wireless: Bluetooth® and Wi-
Fi must also be activated on the iPhone™.
Establish connection
When you rst connect an iPhone™, follow the
instructions on the infotainment system screen
and on the iPhone ™.
The requirements must be met to use Apple
CarPlay™.
Launch Apple CarPlay™:
●
Press HOME > Full Link to access the Full
Link main menu.
●
Press Apple CarPlay™ to establish a connec-
tion with the iPhone™.
Disconnecting
●
In Apple CarPlay™ mode, press the CU-
PRA icon to access the Full Link main menu.
●
Press to interrupt the active connection.
The representation of function buttons on the
screen may vary.
Special characteristics
During an active Apple CarPlay™ connection,
the following characteristics are applicable:
●
Bluetooth® connections between the
iPhone™ and the infotainment system are not
possible.
●
If there is an active Bluetooth® connection, it
is automatically interrupted.
●
It is not possible to use the built-in navigation
system and the Apple CarPlay™ navigation sys-
tem at the same time. The last route started
interrupts the one that was previously active.
●
Depending on the infotainment system you
use, on the instrument panel screen you can
view data from the Telephone mode.
●
Only navigation instructions from compatible
apps are displayed on the instrument cluster's
screen.
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
Voice control
●
Press on the multifunction steering wheel
briey to start voice control using the infotain-
ment system.
●
Press this button for a long time to start voice
control (Siri™) of the connected iPhone™.