Cupra FORMENTOR 2024 - Page 30

28
Driver information
Operating conditions
Driving behaviour is only assessed when the
speed is higher than 10 km/h.
WARNING
The driver attention monitor cannot be a
substitute for the driver's attention and only
works within the limits of the system. There-
fore, the driver attention monitor may not be
able to detect whether the driver is paying
attention in all situations and may not react
or may react with a delay or in an unwanted
manner. There is a risk of accidents and seri-
ous or even fatal injuries.
●
Always pay proper attention and do not rely
solely on the system. The driver is responsi-
ble for his or her tness to drive at all times.
●
Note the limits of the system
›››page28.
●
Avoid being distracted while driving.
●
Adjust the vehicle's personal settings be-
fore starting the journey.
●
Follow the information on the instrument
cluster screen and respond as prompted.
›››page28.
Note
In the event of a fault, have the system
checked by a qualied workshop. CUPRA
recommends that you visit an oicial dealer.
System limits
aecting the driver
attention monitor
The driver attention monitor has system rela-
ted limitations. The following conditions may
limit the operation of the driver attention mon-
itor or prevent it from operating at all:
●
Speeds below 10 km/h.
●
Severe driver distraction due to external in-
uences such as traic.
●
Severe driver distraction due to actions not
related to the vehicle (for example, using a
mobile device).
Driving with the driver attention
monitor
Switching on and o
You can switch the driver attention monitor on
and o manually.
In the infotainment system:
1. Open the Assistance systems menu.
2. Switch the driver attention monitor on
or o in the corresponding submenu
›››page39.
Note
If the function was manually switched o
during the last journey, this setting will stay
the same when the vehicle is started again.
Activating and deactivating the audible
warning
1. Open the Assistance systems menu.
2. Open the Attention Monitor.
3. Activate or deactivate the audible warn-
ing under the corresponding option
›››page39.
Sensitivity adjustment
You can manually adjust the sensitivity of the
driver attention monitor and thereby inuence
how quickly the system reacts to your driving
behaviour.
In the infotainment system:
1.
Open the Assistance systems menu.
2.
Open the Attention Monitor.
3.
Select the sensitivity in the Sensitivitysub-
menu›››page39.
Concealing messages via the multi-function
steering wheel
1. Press the button on the multifunction
steering wheel.
Driver attention monitor warning
levels
If the system detects that the driver is dis-
tracted, it indicates this on the screen of the
instrument cluster by a control or warning