Cupra FORMENTOR 2024 - Coolant Tank

Checking and relling levels
347
Cooling system
1
2
For the sake of the environment
Motor coolant and its additives can pollute
the environment. If any operating uid leaks
out, collect it and dispose of it properly and
in an environmentally friendly manner.
Coolant tank
✓ Valid for: hybrid vehicles.
Fig.217 Engine compartment: Coolant
tanks
Hybrid vehicles have 2 independent coolant
expansion tanks.
›››Fig.217
Coolant expansion tank for the combus-
tion engine.
Coolant expansion tank for the high-volt-
age system. Visually check the coolant
level of the high-voltage system Do not
open it! It is sealed.
If the coolant level in the cooling system of
the high-voltage system is too low:
●
Do not top up coolant!
●
Contact a specialised workshop immediately.
Check and rell the coolant
Fig.218 In the front compartment:
marking on coolant expansion tank.
Fig.219 Front compartment: coolant
expansion tank cap.
Previous steps
●
Park the vehicle on a rm, at surface.
●
Wait until the engine has fully cooled ››› .
●
Open the front bonnet.
●
The motor coolant expansion tank can be
recognised by the symbol on the cap
›››Fig.219
Check the level
When the vehicle is delivered (new vehicles),
the coolant may be above the marked area.
This is normal. It is not necessary to suck the
coolant out.
●
When the engine is cold, check the coolant
level using the side marking on the expansion
tank ›››Fig.218. The coolant level should be
between the marks.