Instrument cluster operation
●
The windscreen is dirty in the area of the
camera or the camera view is impaired by
weather conditions. Clean the windscreen
›››page384.
●
The camera's view is impaired by added parts
or stickers. Keep the area around the camera
clear ›››page194.
●
The camera has been moved or damaged,
for example due to damage to the windscreen.
Check whether the damage can be seen.
●
If the problem persists, visit a duly qualied
workshop. CUPRA recommends that you visit
an oicial dealer.
The speed warning system is partially
deactivated
A white control lamp is shown on the instru-
ment cluster screen. The default conguration
of the speed warning has been changed:
●
Check whether the speed warning is
switched o ›››page31.
●
Check if the audible warning is activated
›››page31.
●
Check if the default warning threshold has
been changed ›››page31.
Instrument cluster opera-
tion
Introduction
With the ignition switched on, it is possible to
read the dierent functions of the display by
scrolling through the menus.
In vehicles with multifunction steering wheel,
the multifunction display can only be operated
with the steering wheel buttons.
Some menu options can only be read when
the vehicle is at a standstill.
Instrument panel menus
The number of menus and information items
available will depend on the vehicle’s electron-
ics and features.
●
Vehicle status ›››page23.
●
Driving data ›››page22.
●
Assist systems.
–
Front Assist On/O ›››page211
–
ACC (only display) ›››page204
–
Lane Assist On/O ›››page215
–
Travel Assist ›››page217
–
Side Assist On/O ›››page223
–
Speed warning On/O ›››page31
●
Navigation.
●
Audio.
●
Telephone.
WARNING
Distracting the driver in any way can lead to
an accident and cause injuries.
●
Never use the menus on the instrument
panel display while the vehicle is in motion.
NOTICE
After charging or changing the 12-volt bat-
tery, check the system settings. If the power
supply is interrupted, the system settings
might be incorrect or deleted.
To Next Page
Loading...
