Cupra FORMENTOR 2024 - Page 91

High-voltage battery
89
Charging settings
Set charging locations (Schedule)
You can create schedules associated with
charging locations in the infotainment system.
The vehicle recognises a saved charging loca-
tion when it is there, and uses the available
settings when charging.
Location data
The infotainment system uses the current lo-
cation data (geographical coordinates) of the
vehicle when you create or use a schedule.
Create a schedule
●
In the infotainment system select: >
Charging.
●
Press Schedule.
●
Add the charging location and give it a name
(maximum of 5).
Delete a schedule
●
In the infotainment system select: >
Charging.
●
Press Schedule.
●
Press the function button.
●
Press the function button to delete the
saved schedule.
Settings
●
For immediate charging in the current
schedule, activate the corresponding function
in the departure menu ›››page41 or in the
charging modes selector located in the Charg-
ing menu.
●
Departure time ›››page89
●
Reduce the AC charging power: the charg-
ing current is reduced to 6 or 8 amps. With
this setting you can reduce the mains overload
when charging at a socket.
●
Release the AC power cable: After the charg-
ing process is complete, the connector relea-
ses automatically.
●
Minimum battery charging level from 0-50%
›››page88.
●
Maximum battery charging level from
50-100% ›››page88.
●
Preferred times. Activating this charging
mode can be helpful when there are other
electrical consumers in the household or when
you prefer to charge during cheaper time peri-
ods.
●
Display address or geographical coordinates
Note
All charging settings stored in the sched-
ule always apply to the currently recognised
charging location.
Departure time settings
When a charging location has been created,
the high-voltage battery can be charged for a
certain time.
Set the departure time
●
In the infotainment system select: >
Charging.
●
Press Schedule.
●
Open the prole of a charging location.
●
Set a departure time (maximum of three per
location).
–
Days of the week.
–
Time at which the high-voltage battery
should be charged.
–
Use once or weekly.
Air conditioning
The vehicle interior is cooled or heated for the
departure time by the stationary air condition-
ing. The operation depends on the equipment.
●
Set the desired temperature in the Station-
ary air conditioning ›››page157 menu.
●
Select the Charge and air conditioning
prior to departure function from the drop-
down list of charging modes.