EasyManua.ls Logo

Cupra FORMENTOR - Electrically Opening and Closing the Windows; Window Controls

Cupra FORMENTOR
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Opening and closing
Window controls
Electrically opening and closing the
windows
Fig. 86
Detail of the driver's door: window con-
trols.
Opening the window: press the button .
Closing the window: pull the button .
Butt
ons on the driv
er door
Window on the front left door
Window on the front right door
Window on the rear left door
Window on the rear right door
Safety switch for deactivating the electric
window buttons in the rear doors.
1
2
3
4
5
The front and rear electric windows can be
oper
at
ed by using the controls on the driver
door. The other doors each have a switch for
their own window.
Always close the windows fully if you park the
vehicle or leave it unattended
.
Y
ou can use the electric windo
ws for approx.
10 minutes after switching off the ignition if
neither the driver door nor the front passen-
ger door have been opened.
Safety switch *
The safety control
Fig. 86
5
on the driver
door can be used t
o disable the electric win-
do
w buttons on the rear doors.
Safety switch not pressed: buttons on rear
doors are activated.
Safety switch pressed: buttons on rear doors
are deactivated.
The safety control symbol lights up in yel-
low if the buttons on the rear doors are
switched off.
Convenience open/close function
The electric windows can be opened or
closed from outside using the vehicle key:
Convenience opening:
Press and hold the button on the remote
control key until all the windows and the sun-
roof* have reached the desired position.
OR: First unlock the vehicle using the
button on the remote control key and then
keep the key in the driver door lock until all
the windows and the sunroof* have reached
the required position.
Convenience closing:
Press and hold button on the remote
control key until all the windows and the sun-
roof* are closed
.
OR: K
eep the key in the driver door in the
"lock" po
sition until all the windows and the
sunroof* are closed.
OR by means of the Keyless Access* (only
closing): Press and hold the locking sensor
surface
Fig. 88 (arrow) on the door han-
dle for several seconds to close the windows
and the sunroof*. If you release the sensor
surface, the closing movement stops.
During convenience closing, first the win-
dows and then the sliding sunroof will be
closed.
In the infotainment system different settings
can be adjusted using the function button
> Exterior > Windows> Convenience open-
ing.
One-touch opening and closing
The one-touch automatic opening and clos-
ing is used to open or close the windows
completely. It will not be necessary to hold
»
109

Table of Contents

Related product manuals