Transport and practical equipment
●
R
emo
ve the rear shelf from the side sup-
ports
›››
Fig. 110 by pulling it upwards and
then take it out.
If necessary, the rear shelf can be stored un-
der the luggage compartment double floor
›››
page 135.
Fitting
●
Insert the cover horizontally so that the
“recess” fits onto the axis of the supports
›››
Fig. 110 and press down until it engages.
●
Hook the loops
›››
Fig. 109
B
to the rear
lid.
WARNING
Animals, loose or unsecured or objects car-
ried on the rear shelf can cause serious in-
jury in case of sudden manoeuvring or
braking or in case of an accident.
●
Do not leave hard, sharp or heavy objects
or in bags on the rear shelf.
●
Never transport animals on the rear shelf.
CAUTION
●
Before closing the rear lid, ensure that
the rear shelf is correctly fitted.
●
An overloaded luggage compartment
could mean that the rear shelf is not cor-
rectly seated and it may be bent or dam-
aged.
●
If the luggag
e compartment is overloa-
ded, remove the tray.
Note
Ensure that, when placing items of clothing
on the luggage compartment cover, rear
visibility is not reduced.
Store the rear shelf
Fig. 111
In the luggage compartment: covers for
storing the rear shelf.
Fig. 112 In the luggage compartment: fitting the
rear shelf.
Depending on the equipment, once the lug-
g
ag
e compartment shelf has been removed,
it can be stored under the boot floor.
●
Remove the left and right covers
›››
Fig. 111.
●
Place the rear shelf in the corresponding
housing
›››
Fig. 112 .
●
Put the left and right covers in their original
position.
135
To Next Page
Loading...
