Infotainment operation
Pair, connect and manage
Requirement for pairing:
●
Bluetooth® is activated on the mobile
phone device.
●
Bluet
ooth® is activated on the infotain-
ment system.
●
Depending on the mobile device, it will be
necessary to have the Bluetooth® menu
open or activate the Visibility option so that
the device is visible from the infotainment
system.
Pair a mobile phone device suitable for tel-
ephony with the infotainment system to use
the telephone interface functions. On the
first connection, the mobile phone device is
paired with the infotainment system. Doing
so saves a user profile
›››
page 201 .
The pairing can take a few minutes. The
functions available depend on the mobile
phone device used and its operating system.
Pair a mobile phone device
●
Open the list of available Bluetooth® devi-
ces on the mobile phone device and select
the name of the inf
otainment system.
●
Please note and, if necessary, confirm the
messages that appear on the mobile phone
device and on the infotainment system. If the
pairing was successful, the phone data is
saved in the user profile.
●
Optional: confirm the data transfer mes-
sage on the mobile phone device.
Active and passive connection
To use the functions of the telephone inter-
face, there must be at least one mobile
phone device connected to the infotain-
ment system. If there are several mobile
phone devices connected to the infotain-
ment system, you can switch between active
and passive connections. To use the tele-
phone interface with the desired mobile
phone device, establish the active connec-
tion with the infotainment system.
Difference between connection types
Primary
The mobile phone device is paired and
connected. The functions of the tele-
phone interface are performed with the
data of said mobile phone device.
Secondary
The mobile phone device is paired and
connected. Calls can be managed but
the phone book, messages or other
functions will not be active.
Paired mobile phone devices are stored in
the inf
ot
ainment system, even if they are not
currently connected.
Connect a mobile phone device
Requirement: the mobile phone device is
paired with the infotainment system.
●
Bluetooth® is activated on the mobile
phone device.
Establish an active connection
Requirement: several mobile phone devices
are connected to the infotainment system at
the same time.
●
Select the desired mobile phone device
from the drop-down menu. All other mobile
phone devices are automatically in the pas-
sive connection.
User profiles
For each of the paired mobile phone devices
an individual user profile is automatically cre-
ated. In the user profile, data from the mo-
bile phone device is stored, for example,
contact details or settings. A maximum of
four user profiles can be saved in the info-
tainment system at the same time.
WARNING
If you perform the pairing while driving, it
could cause an accident or injury.
●
Perform pairing only with the vehicle at a
standstill.
»
201
To Next Page
Loading...
