EasyManua.ls Logo

Cupra FORMENTOR - Page 323

Cupra FORMENTOR
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Checking and refilling levels
Open the door and pull the le
v
er under the
dashboard
Fig. 200
1
.
To lift the bonnet, press towards the left on
the le
v
er located under the bonnet, in the
centre
Fig. 201
2
. The arrester hooks are
r
ele
ased.
The bonnet can be opened. Release the
bonnet stay and secure it in the fixture de-
signed for this in the bonnet.
Closing the bonnet
Slightly lift the bonnet.
Release the bonnet stay and replace it in its
support.
At a height of approximately 30 cm let it fall
so it locks.
If the bonnet does not close, do not press
downwards. Open it again and let it fall as
mentioned above.
WARNING
Make sure that the bonnet is properly
closed. If it opens when driving, it can cause
an accident.
CAUTION
To avoid damage to the bonnet and to the
windscreen wiper arms, only open it when
the windscreen wipers are in place against
the windscreen.
321

Table of Contents

Related product manuals