EasyManua.ls Logo

Cupra FORMENTOR - Filling Capacities; Fuel Consumption; Important Information; Indications about the Technical Data

Cupra FORMENTOR
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Indications about the technical data
Technical data
Indications about the tech-
nical data
Important information
Introduction
The values indicated in the technical data
ma
y diff
er depending on optional equipment
or version of the model, as well as in the case
of special vehicles and equipment for certain
countries.
The information in the official vehicle docu-
mentation takes precedence at all times.
Abbreviations used in the Technical Speci-
fications section
kW Kilowatt, engine power measurement.
PS
Horsepower (not currently used), en-
gine power measurement unit.
rpm, 1/min Revolutions per minute – engine speed.
Nm Newton metres, unit of engine torque.
CZ
Cetane number, indication of the diesel
combustion power.
RON
Research octane number, indication of
the knock resistance of petrol.
Vehicle identification data
Vehicle ID number
The vehicle ID number can be f
ound in the
following places:
In the infotainment system using the func-
tion button > Interior > Instrument clus-
ter > Service.
One the vehicle's data label.
In front, under the windscreen.
To the right in the engine compartment.
Type plat
e
The type plate is located on the vehicle’s
right hand door frame. Vehicles for certain
export countries do not have a type plate.
Fuel consumption
Approved consumption values are derived
fr
om me
asurements performed or super-
vised by certified EU laboratories, according
to the legislation in force at the time (for
more information, see the Publications Of-
fice of the European Union on the EUR-Lex
website: © European Union, http://eur-
lex.europa.eu/) and apply to the specified
vehicle characteristics.
The values relating to fuel consumption and
CO
2
emissions can be found in the docu-
mentation provided to the purchaser of the
vehicle at the time of purchase.
Fuel consumption and CO
2
emissions de-
pend on the equipment/features of each in-
dividual vehicle, as well as on the driving
style, road conditions, traffic conditions, en-
vironmental conditions, load or number of
passengers.
Filling capacities
Tank level
Vehicles with front-wheel
drive:
50 l, 7 l reserve
Vehicles with all-wheel
drive
55 l, 8.5 l reserve
Plug-in hybrid vehicles
(PHEV)
40 l, 8 l reserve
Capacity of the windscreen washer fluid con-
tainer
approx. 3 litres
Weights
Load on the roof
The maximum authorised load on the r
oof
of y
our vehicle is 75 kg.
»
363

Table of Contents

Related product manuals