Cupra TERRAMAR 2024 - Window Controls; Opening and Closing the Windows

Opening and closing
115
Window controls
1
2
3
4
5
●
Therefore, always make sure that there is
no unsupervised valid key in the area near
the rear lid.
●
Before carrying out any maintenance or re-
pair work on the vehicle, always disable the
Easy Open feature via the infotainment sys-
tem.
●
Before washing the vehicle, always disable
the Easy Open function via the infotainment
system.
●
Before attaching a bike rack or hitching a
trailer ›››page320, always disable the Easy
Open function via the infotainment system.
Window controls
Opening and closing the windows
Fig.86 Detail of the driver's door: window
controls.
●
Open the window: press button
●
Close the window: pull button
Buttons on the driver’s door
Left-hand front door window
Right-hand front door window
Left-hand rear door window
Right-hand rear door window
Safety control for deactivating the window
control buttons on the rear doors
Both front and rear windows can be operated
from the controls on the driver's door. The
other doors have a separate control for each
window.
Always close the windows completely when the
vehicle is parked or out of sight ››› .
You can use the electric windows for approx.
10 minutes after switching o the ignition if
neither the driver’s door nor the front passen-
ger door have been opened and the ignition
key has not been removed (depending on the
equipment).
Safety switch
The safety control ›››Fig.86
5
on the driv-
er's door can be used to disable the electric
window buttons on the rear doors.
Safety control not pressed: the buttons on the
rear doors are activated.
Safety control pressed: the buttons on the rear
doors are deactivated.
The safety control symbol lights up in yellow
if the buttons on the rear doors are switched
o.
Comfort opening and closing
The windows can be opened and closed from
the outside using the vehicle key: