EasyManua.ls Logo

Cupra TERRAMAR 2024 - Lights; Vehicle Lighting; Indicator Lamps

Cupra TERRAMAR 2024
430 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
130
Lights
Lights
Vehicle lighting
Indicator lamps
Lights up yellow
There is a total or partial failure of the
exterior lighting.
Lights up yellow
Rear fog light on.
Lights up green
Left or right turn signal. The control
lamp ashes twice as fast when a
turn signal is faulty.
Hazard warning lights on ›››page71.
Lights up green
Trailer turn signals.
Lights up blue
Main beam on or asher on
›››page132.
Lights up blue
The Light Assist system is on
›››page133.
Lighting and visibility buttons
Fig.101 Instrument panel: light panel.
By pressing the button you can select be-
tween (the corresponding indicator lights up):
Switching on the dipped beam head-
lights.
Automatic control of dipped beam and
daytime running light.
Switching on the side lights. The auto-
matic headlight control
activates at
over a speed of approx. 10km/h (6mph).
Additionally, the following light functions can
be activated by pressing on the corresponding
symbol.
When the function is activated, the corre-
sponding symbol lights up. To deactivate it, you
will need to press on the symbol again.
Turning the front fog lights on or o. In
addition, a pop-up window with the se-
lected position is displayed in the instru-
ment cluster.
Turning the rear fog lights on or o. In ad-
dition, the control lamp on the instrument
cluster lights up .
It is always the driver’s responsibility to ensure
that the vehicle is driven with the correct
headlamp settings and the correct lights.
Side lights
When the side light is switched on, the side
lights in both headlights, certain areas of the
rear light clusters, the number plate light and
the button lights on the instrument cluster turn
on. The automatic dipped beam activates as of
a speed of approx. 10 km/h (6 mph).
Automatic dipped beam headlight control
When the automatic dipped beam is switched
on, the vehicle's lighting and the lighting of the
instruments and controls turn on and o under
the following conditions:
The light sensor has detected darkness.
The wiper has been on for some time.
When the lights are on, the control lamp lights
up in green.
The automatic dipped beam is only an auxili-
ary function and cannot always identify all sit-
uations that may arise during driving with sui-
cient precision.

Table of Contents

Related product manuals