Cupra TERRAMAR 2024 - Page 144

142
Visibility
1)
Do the opposite in right-hand drive vehicles.
2)
Not available in all markets.
Activating exterior mirror functions
The following exterior mirror functions can
be activated and deactivated in the vehicle
settings menu of the infotainment system
›››page40.
Note
The exterior mirror functions are described
below. For left-hand drive vehicles, position
corresponds to the exterior mirror on the
driver’s side and position corresponds to
the exterior mirror on the passenger’s side.
Do the opposite for right-hand drive vehi-
cles.
Synchronized regulation of the exterior mir-
rors
The synchronised mirror setting simultane-
ously adjusts the right hand exterior mirror
when the left mirror is adjusted.
●
Turn the control to position
1)
.
●
Adjust the left-hand exterior mirror. The
right exterior mirror will be adjusted at the
same time (synchronised).
●
If necessary, correct the setting of the right
hand mirror: turn the control to position
1)
.
Folding the exterior mirrors when locking
the vehicle
When the vehicle is locked or unlocked from
the outside, the exterior mirrors may fold in
or out automatically, depending on the equip-
ment. For this purpose, the rotary control has
to be in position , , , or .
If the rotary control of the electric exterior mir-
rors is in the folded position, the exterior mir-
rors remain folded.
Memory function
The memory buttons ›››page127 can be
used to save and turn on settings for the exte-
rior mirrors.
The settings will also be saved in the user of
the online services
2)
.
Saving the passenger rear view mirror set-
tings for reversing
●
Switch the ignition on.
●
In the infotainment system, select > Vehi-
cle > Exterior > Mirrors ›››page40.
●
Select position
1)
on the control.
●
Select reverse gear.
●
Adjust the front passenger exterior mirror so
that you can see, for example, the kerb area
well.
●
Release the reverse gear.
●
The adjusted position for the rear view mirror
is stored.
Activating the passenger side exterior mirror
settings for reversing
●
Turn the exterior mirror control knob to posi-
tion
1)
.
●
Engage reverse gear with the ignition
switched on. The right-hand exterior rear-view
mirror will move to the saved position.
The passenger side exterior mirror leaves the
saved reversing position when the vehicle is
travelling faster than approx. 15km/h (9mph),
or if the control is turned from position to
another position.