●
The iPhone™ must be compatible with Ap-
ple CarPlay™.
●
Voice control (Siri ™) must be active on the
iPhone™.
●
Apple CarPlay™ must be active without limi-
tations in the iPhone™ settings.
●
If this is not possible via Apple CarPlay™
Wireless, the iPhone™ must be connected to
the infotainment system via a USB connection.
Only USB connections with data transmission
are suitable for the use of Apple CarPlay™.
●
The USB cable used must be an original Ap-
ple™ cable.
Apple CarPlay™ Wireless: Bluetooth® and Wi-
Fi must also be activated on the iPhone™.
Establish connection
When you rst connect an iPhone™, follow the
instructions on the infotainment system screen
and on the iPhone ™.
The requirements must be met to use Apple
CarPlay™.
Launch Apple CarPlay™:
●
Press HOME > Full Link to access the Full
Link main menu.
●
Press Apple CarPlay™ to establish a connec-
tion with the iPhone™.
Disconnecting
●
In Apple CarPlay™ mode, press the CU-
PRA icon to access the Full Link main menu.
●
Press to interrupt the active connection.
The representation of function buttons on the
screen may vary.
Special characteristics
During an active Apple CarPlay™ connection,
the following characteristics are applicable:
●
Bluetooth® connections between the
iPhone™ and the infotainment system are not
possible.
●
If there is an active Bluetooth® connection, it
is automatically interrupted.
●
It is not possible to use the built-in navigation
system and the Apple CarPlay™ navigation sys-
tem at the same time. The last route started
interrupts the one that was previously active.
●
Depending on the infotainment system you
use, on the instrument panel screen you can
view data from the Telephone mode.
●
Only navigation instructions from compatible
apps are displayed on the instrument cluster's
screen.
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
Voice control
●
Press on the multifunction steering wheel
briey to start voice control using the infotain-
ment system.
●
Press this button for a long time to start voice
control (Siri™) of the connected iPhone™.
Note
●
The availability of technologies depends on
the country and may vary.
●
You will nd information about technical
requirements, compatible iPhones, certied
applications and their availability on the CU-
PRA and Apple CarPlay™ websites, at spe-
cialised CUPRA dealerships or at any SEAT
dealership.
Android Auto™
Requirements for Android Auto™
In order to use Android Auto™, the following
requirements must be met:
●
The mobile phone device, called smart-
phone from here on, must be compatible with
Android Auto™.
●
The smartphone must have an Android
Auto™ application installed.