Cupra TERRAMAR 2024 - Page 296

294
Infotainment system
Select via the frequency band (AM and FM)
1. Activate the frequency band.
2. Click on the cursor, scroll through the fre-
quency band and release it when you reach
the frequency band you want.
OR: press on a point on the frequency
band. The cursor will automatically jump to
the corresponding frequency.
The station of the set frequency is tuned.
Select from the station list (AM and FM/DAB)
The station list shows the stations that are cur-
rently tunable. In the AM frequency band, you
may have to update the station list if you are no
longer in the area where you last accessed the
station list. In the FM/DAB frequency band, the
station list is automatically updated.
1. Open the station list
2. Press the station you want.
The selected station is tuned. In the case of
FM/DAB and if the station is available, the best
quality reception is automatically selected.
Search and lter stations (Internet radio)
In Online Radio mode, stations can be ltered
by categories and can be searched by text.
1.
Open the station list.
2.
Select the category by which the stations
are to be ltered.
OR:
press to start the text search. The
input eld is displayed.
3. Enter the name of the station you want.
The list of the stations found is updated
while entering the text.
4. Press the station you want.
The selected station is tuned.
Save stations on the preset keys
You can store up to 36 stations of dierent fre-
quency bands and reception types as favour-
ites using the preset buttons.
1. Tune the station you want.
2. Access the preset buttons.
3. Press the preset button and keep it pressed
until the station is stored.
OR: press the station on the station list and
keep it pressed. The preset buttons are dis-
played.
4. Press the preset button.
The station is stored in the selected preset
button.
If a station was already stored in the preset but-
ton, it is overwritten with the new station.
Special functions in Radio mode
Traic information (TP)
The TP function monitors the announcements
of a station with traic information and auto-
matically reproduces them in the Radio mode
or in the multimedia playback that is active.
To do this, you have to be able to tune into a
station with traic information.
Some stations without their own traic in-
formation support the TP function by broad-
casting traic information from other stations
(EON).
In the FM frequency band or in the Multimedia
mode, a station with traic information in the
background is automatically tuned while it is
possible to tune into a station with traic infor-
mation.
If no station with traic information can be
tuned in, the device automatically searches for
stations with tunable traic information.
Stations with traic information are not availa-
ble in all countries.
Activating and deactivating the TP func-
tion
●
In Radio mode or Multimedia mode, press
> Traic programme (TP).