Cupra TERRAMAR 2024 - Page 307

Infotainment system
305
Navigation
Close the additional screen
●
Press on an empty area outside the addi-
tional window.
●
OR: press .
●
OR: press Accept.
Functions in the additional window:
Show on
map
Show what is selected on the
map.
Add stop-
over desti-
nation
Add a stopover to the route
guidance.
Direct
route
Starts direct route guidance.
Delete Delete a stopover from the
route guidance.
Avoid Avoid traic jam. The route will
recalculate.
Stop route
guidance
Ends the current route guid-
ance.
Close the additional window.
Add a destination to favourites.
Learn usage pattern
When the vehicle is in motion, navigation saves
routes and destinations used to automatically
generate destination proposals. Destinations
are learned based on the time of day and the
day of the week.
Navigation can propose up to 5 routes at the
same time. The proposed routes may be dier-
ent from the routes of the normal route guid-
ance.
If one of the proposed destinations is selected,
the guide to that destination is started.
The route guidance follows the selected route
until the vehicle deviates from it. In that case,
the route is recalculated and takes you back
along the most direct path to the initially selec-
ted destination.
Important traic jams are taken into account
in the route guidance, and are avoided if alter-
native routes are available, provided navigation
has such data.
You can activate and deactivate the function
whenever you want.
Enable and disable learning usage pattern
The setting is in the corresponding navigation
menu > Basic function settings.
●
To activate the function, activate Learn us-
age pattern.
●
To disable the function, disable Learn usage
pattern.
●
To delete saved data, press Delete usage
pattern.
360° electric operating range display
Valid for: vehicles with plug-in hybrid drive
The 360° electric operating range display
shows the possible range with the current
charge level of the high voltage battery.
●
To deactivate the 360° range display, select:
Navigation Settings > Show range on map.
Note
●
If the battery charge level is very low,
the range indicator is automatically hidden.
When the battery is recharged, the range in-
dicator is displayed again.
●
If necessary, adapt the map view to display
the full range on the map.