Cupra TERRAMAR 2024 - Page 36

34
Driver information
the system and, depending on the congura-
tion, will also issue an audible warning. A warn-
ing is issued at two levels.
Fig.10 On the instrument cluster screen:
violation of the detected speed limit
(illustration).
Speed warning - Level 1
Speed limit violation detected. The speed
limit detected by the system ashes continu-
ously on the instrument cluster and, depend-
ing on the equipment, on the front display
›››Fig.10.
Speed warning - Level 2
Progressive violation of the speed limit has
been detected.
An audio signal sounds. The speed limit de-
tected by the system ashes continuously on
the instrument cluster and, depending on the
equipment, on the front display ›››Fig.10.
Note
●
The second warning level is activated if the
speed remains above the limit.
●
The second warning level is cancelled again
when the driver actively reduces the speed.
Troubleshooting
 Advanced road sign recognition is
not available
An audio signal sounds. A yellow control lamp
appears on the instrument cluster screen in
combination with the central yellow lamp. A
text message is also shown on the instrument
cluster screen and in the vehicle status menu.
●
The windscreen is dirty in the area of the
camera or the camera view is impaired by
weather conditions. Clean the windscreen
›››page391.
●
The camera's view is impaired by added parts
or stickers. Keep the area around the camera
clear ›››page193.
●
The camera has been moved or damaged,
for example due to damage to the windscreen.
Check whether the damage can be seen.
●
If the problem persists, visit a duly qualied
workshop. CUPRA recommends that you visit
an oicial dealer.
The speed warning system is partially
deactivated
A white control lamp is shown on the instru-
ment cluster screen. The default conguration
of the speed warning has been changed:
●
Check whether the speed warning is
switched o ›››page32.
●
Check if the audible warning is activated
›››page32.
●
Check if the default warning threshold has
been changed ›››page32.
Instrument cluster opera-
tion
Introduction
With the ignition switched on, it is possible to
read the dierent functions of the display by
scrolling through the menus.
In vehicles with multifunction steering wheel,
the multifunction display can only be operated
with the steering wheel buttons.
Some menu options can only be read when
the vehicle is at a standstill.
Instrument panel menus
The number of menus and information items
available will depend on the vehicle’s electron-
ics and features.