Cupra TERRAMAR 2024 - Operation Using the Multifunction Steering Wheel; Infotainment System Operation and Displays

Driver information
35
Infotainment system operation and displays
●
Vehicle status ›››page25.
●
Driving data ›››page24.
●
Assist systems.
–
Front Assist On/O ›››page210
–
ACC (only display) ›››page203
–
Lane Assist On/O ›››page214
–
Travel Assist ›››page216
–
Side Assist On/O ›››page221
–
Speed warning On/O ›››page32
●
Navigation.
●
Audio.
●
Telephone.
WARNING
Distracting the driver in any way can lead to
an accident and cause injuries.
●
Never use the menus on the instrument
panel display while the vehicle is in motion.
NOTICE
After charging or changing the 12-volt bat-
tery, check the system settings. If the power
supply is interrupted, the system settings
might be incorrect or deleted.
Operation using the multifunction
steering wheel
Fig.11 Right side of multifunction
steering wheel: buttons to the menus and
informative indications on the instrument
panel (depending on the version).
As long as a priority 1 ›››page25 warning
is active, it will not be possible to access any
menu. Some warnings can be conrmed and
hidden with the button of the multifunction
steering wheel ›››Fig.11.
Select a menu or an informative display
●
Switch the ignition on.
●
If a message or vehicle symbol is displayed,
press the button ›››Fig.11; several times if
necessary.
●
To change menus, use or buttons.
●
To open the menu or the information dis-
played, press the button or wait a few sec-
onds until the menu or the informative display
opens automatically.
Changing menu settings
●
In the menu displayed, turn the right thumb-
wheel of the multifunction steering wheel until
the desired option of the menu is highlighted.
The option appears framed.
●
Press the button to make the required
modications. A mark indicates that the sys-
tem or function is activated.
Back to menu selection
●
Press the or button.
Infotainment system op-
eration and displays
Introduction
The infotainment system brings together im-
portant vehicle functions and systems into a
single central control unit, e.g. air conditioning,
menu settings, radio equipment and the navi-
gation system.
The actual number of menus available and the
name of the various options will depend on the
vehicle’s electronics and equipment.