Cupra TERRAMAR 2024 - Child Seats Group Classification

62
Safety
●
Rear-facing child seat (group 0+): ISOFIX and
support leg (Britax Römer Baby-Safe 3 i-SIZE +
Flex Base i-SENSE).
●
Forward-facing child seat (group 1): ISOFIX
AND Top Tether (Britax Römer TRIFIX 2 i-Size).
●
Forward-facing child seat (group 2): seat belt
and ISOFIX (Britax Römer KIDFIX i-Size). You
must also use the seat’s “Secure-Guard” seat-
belt connection point and adjust the side im-
pact protection system “SICT” (available on
certain models), located in the seat backrest.
Adjust only the “SICT” closest to the door.
Please follow the child seat manufacturer's us-
age instructions.
●
Forward-facing child seat (group 3): seat belt
and ISOFIX (Britax Römer KIDFIX i-Size). Group
3 can use the seat with backrest or only the
seat base without the backrest (booster). The
backrest of the child seat has an adult seat belt
guide and a head restraint, meaning that the
seat with the backrest oers better protection
than boosters without backrests. CUPRA rec-
ommends the use of child seats with backrests.
Follow the manufacturer's instructions and ob-
serve any statutory requirements when instal-
ling and using child seats. Always read and note
›››page63.
We recommend you always carry the manufac-
turer's Child Seat Instruction Manual together
with the on-board documentation.
Child seats group
classication
Fig.37 Examples of child seats.
Use only child seats that are oicially approved
and suitable for the child.
These seats are subject to the ECE-R44 or
ECE-R129 standards. ECE-R stands for: Eco-
nomic Commission for Europe Regulation.
Child seats by weight group
The child seats are grouped into 5 categories:
Age group Weight of the child
Group 0 Up to 10 kg
Group 0+ Up to 13 kg
Group 1 From 9 to 18 kg
Age group Weight of the child
Group 2 From 15 to 25 kg
Group 3 From 22 to 36 kg
Child seats that have been tested and ap-
proved under the ECE R44 or ECE-R129 stand-
ards bear the ECE-R44 or ECE-R129 test marks
on the seat (the letter E in a circle with the test
number below it).
Follow the manufacturer's instructions and ob-
serve any statutory requirements when instal-
ling and using child seats.
We recommend you to always include the
manufacturer's Child Seat Instruction Manual
together with the on-board documentation.
CUPRA recommends you use child seats from
the Original Accessories Catalogue. These
child seats have been designed and tested for
use in our vehicles. You can nd the right child
seat for your model and age group at our deal-
ers.
Child seats by approval category
Child seats may have the approval category of
universal, semi-universal, vehicle specic (all
according to the ECE-R44 standard) or i-Size
(according to the ECE-R129 standard).