Cuprinol FENCE SPRAYER - User Manual

USER GUIDE
Thank you for purchasing
the Cuprinol Fence Sprayer
Please read all the instructions
in this user guide before using
this product and retain them
for future use.
For use with
Sprayable Cuprinol
Treatments
OTHER INFORMATION
PRECAUTIONS
Please read and comply with all instructions and precautions in the Cuprinol
Fence Sprayer user guide and on Sprayable Fence treatment container before use.
Do not modify this unit.
Do not connect to an external pressure source (manual use only).
Do not block or remove or tamper with the pressure release valve (269).
Do not use if sprayer tank is damaged.
Do not use if components are excessively worn.
Compressed air is dangerous and should not be directed at people.
The Cuprinol Fence Sprayer is for use with Sprayable Cuprinol treatments only.
3 YEAR GUARANTEE
The guarantee is offered by Imperial Chemical Industries Limited trading as
ICI Paints AkzoNobel (“ICI”).
The guarantee is valid for 3 years from date of purchase and covers the
complete sprayer or individual components.
ICI will repair the sprayer or replace parts free of charge if it
is faulty due to
a manufacturing or material fault.
The guarantee does not cover the application of the sprayable treatments.
The following are specifically excluded from the guarantee:
• Damage caused by misuse or improper handling of the sprayer or used in
no accordance with the instructions.
• Normal “wear and tear”.
• Damage suffered through negligence, willful damage, improper use or
accidental damage.
• Any modifications made by the purchaser to the Sprayer or repairs carried
out by an unauthorised service agent.
• Damage caused by water*, damp, fire, natural light and atmospheric conditions.
• Using the sprayer for application of products other than Sprayable Cuprinol products
listed in the user guide, which could damage and invalidate the guarantee.
*long term immersion in water
This guarantee does not affect your statutory rights.
TO MAKE A CLAIM UNDER THE GUARANTEE
Return the sprayer (or individual component) to the contact address below,
together with proof of purchase.
Use the original packaging or
a similar box to prevent further damage and
retain proof of posting.
FOR TECHNICAL PRODUCT ADVICE CONTACT:
The Customer Advice Centre
ICI Paints, Wexham Road, Slough, SL2 5DS, UK
Telephone +44 (0) 844 4817 817
www.cuprinol.co.uk
FOR REPUBLIC OF IRELAND:
Dulux Paints (Ireland), Commons Road, PO Box 45, Cork
Telephone +353 (0)214220222
REPLACEMENT /SPARE PARTS
FOR REPLACEMENT / SPARE PARTS AND GUARANTEE QUERIES
PLEASE CONTACT:
SOLO SPRAYERS LTD.
20 Vanguard Way, Shoeburyness,
Essex, SS3 9RA - UK
Tel. +44 (0) 1702 525740
Fax. +44 (0) 1702 522752
01/11
DISPOSAL
Dispose of according to local authority guidelines.
Cuprinol, the tree device, Ducksback Cuprinol Sprayable and Garden Shades are trademarks of the AkzoNobel group © AkzoNobel 2010
8.18.95.200
The Cuprinol Fence Sprayer has been
specially designed for use with Sprayable
Cuprinol treatments (Cuprinol Sprayable
Fence Treatment, Cuprinol Decking Oil
and Protector (WB), Cuprinol Shades
and Cuprinol Ducksback Sprayable).
It is not intended for use with any other
treatments, either waterbased or solvent
based and is not to be used with wood
preservers, creosote or creosote alternatives.
It is not intended to be used with any
agrochemicals (insecticides, fungicides,
herbicides) or any application other than
the recommended treatments.
Using this sprayer for application of other
products will result in a disappointing finish
and will invalidate the guarantee.
This guarantee does not affect your
statutory rights.

Summary

How To Use

Assembly of Components

Attaching the hose to the sprayer tank and handset for secure use and leak prevention.

Filling with Fluid

Instructions on how to fill the sprayer with Cuprinol sprayable treatments, noting capacity.

Replacing Piston and Closing

Procedure for replacing the piston and tightening the sprayer lid securely.

Pumping

How to pressurize the sprayer by pumping the handle up and down for optimal spray.

Spraying Technique

Guidance on distance, motion, and technique for achieving an even spray finish.

Finishing Sprayed Treatment

How to spray unused treatment back into the pack for storage.

Releasing Pressure

Crucial safety step to release all pressure before refilling or opening the sprayer.

Cleaning the Sprayer

Detailed steps for cleaning the sprayer, filters, and components after use.

Maintenance

Basic maintenance tips, including lubricating the pump mechanism.

Parts List

Other Information

Precautions for Use

Important safety and usage precautions to follow before operating the sprayer.

3 Year Guarantee Details

Information regarding the sprayer's guarantee, coverage, and exclusions.

Making a Guarantee Claim

Instructions on how to return the sprayer for guarantee claims with proof of purchase.

Technical Product Advice

Contact information for obtaining technical assistance and product advice.

Replacement Spare Parts

Contact details for ordering replacement parts and for guarantee queries.

Disposal Guidelines

Instructions on how to dispose of the sprayer and its components responsibly.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Cuprinol Fence Sprayer is a user-friendly, pump-up sprayer specifically designed for the application of Cuprinol's range of sprayable wood treatments. This device aims to provide a fast and easy way to treat garden wood, including fences, sheds, and gates, ensuring a continuous and controllable spray for an even finish. It is backed by a 3-year guarantee, reflecting its intended durability and reliability when used as directed.

Function Description:

The primary function of the Cuprinol Fence Sprayer is to facilitate the efficient and effective application of specific Cuprinol wood treatments. It operates by manual pressurization, allowing the user to spray the treatment onto surfaces without the need for external power sources. The sprayer is designed to hold one 5-litre pack of Cuprinol Sprayable Treatments, with a 4-litre indicator on the outside of the tank to guide refilling and prevent overfilling.

The spraying mechanism involves a pump-up system where the user pressurizes the tank by pumping a handle. Once optimal pressure is reached, a pressure release valve (269) activates, indicating readiness for spraying. The breakthrough nozzle technology is engineered to deliver a continuous and controllable spray pattern, which is crucial for achieving an even and professional finish on various wood surfaces.

The sprayer is intended for use with the following Cuprinol products:

• Cuprinol Sprayable Fence Treatment
• Cuprinol Decking Oil and Protector (WB)
• Cuprinol Shades
• Cuprinol Ducksback Sprayable

It is explicitly stated that the sprayer is not to be used with:

• Any other treatments, whether water-based or solvent-based.
• Wood preservers, creosote, or creosote alternatives.
• Any agrochemicals (insecticides, fungicides, herbicides).
• Any application other than the recommended treatments.

Using the sprayer with unapproved products will not only result in a disappointing finish but also invalidate the product's guarantee.

Important Technical Specifications:

While specific numerical technical specifications like pressure ratings or flow rates are not explicitly detailed in the provided manual, several design and component details are highlighted:

• Capacity: Designed to hold one 5-litre pack of Cuprinol Sprayable Treatments, with a 4-litre indicator for refilling.
• Nozzle Technology: Features "breakthrough nozzle technology" for continuous, controllable spray. The nozzle assembly includes components like the nozzle (665), pre-orifice (666), and filter (664), which are designed for optimal spray performance.
• Pressure Release Valve (269): An integral safety and operational feature that releases excess air when optimum pressure is reached and must be checked for proper function before each use. It also serves as the mechanism for safely releasing pressure before opening the sprayer.
• Hose (992): Connects the sprayer tank to the handset (166), ensuring fluid delivery to the nozzle.
• Pumping Mechanism: Consists of a handle (407), chamber (406), and piston (921), designed for manual pressurization. A collar seal (164) is part of this mechanism, which benefits from lubrication.
• Components: The manual provides a detailed parts list with item numbers, codes, quantities, and descriptions for all individual components, facilitating identification for maintenance and replacement. Key components include various gaskets (e.g., 101, 159, 167, 349, 608), cone nuts (127, 138), chamber valve (165), tank (265), nut (291), hose bushings (292), lance filter (346), handle body (356), filter spring (363), elbow (414), and the complete handle (743) and cylinder (921) assemblies.

Usage Features:

The Cuprinol Fence Sprayer is designed with several features to ensure ease of use and effective application:

• Assembly: Most components are pre-assembled. Initial setup involves securely attaching the hose to the sprayer tank and handset. Users are advised to test for proper delivery and tightness with water before first use.
• Filling: Simple process of removing the lid and pouring the treatment into the sprayer. The 4-litre indicator helps prevent overfilling. It is crucial to shake the pack of sprayable treatments thoroughly before filling.
• Pressurization: Achieved by pumping the handle up and down with two hands. The pressure release valve (269) indicates when optimum pressure is reached by releasing air and showing a red indicator.
• Spraying Technique:
  • Recommended distance: Approximately 15-30 cm (6-12 inches) from the fence panel.
  • Method: Start by spraying edges and vertical struts, then the center. Use a slow, sweeping motion, spraying horizontally and overlapping approximately half of the previous pass for an even finish.
  • Pace: Begin slowly and gradually increase pace. Spraying too quickly can lead to an uneven finish, while spraying too slowly can cause runs, which should be brushed into the wood.
  • Overspray: While the sprayer has a controlled spray pattern, some overspray may occur. This can be minimized by avoiding windy conditions and using a cardboard or plastic shield. Any overspray should be cleaned with water and household detergent, and excessive spillage on plants should be rinsed off.
• Re-pressurization: Users are instructed to re-pressurize to maximum pressure when the spray pattern "tails off."
• Blocked Nozzle Management: In case of partial blockage, users can release pressure, unscrew the retainer (291), remove nozzle components (665, 666) and filter (664), and wash them with water to clear any fluid traces.
• Finishing: Unused treatment can be sprayed directly back into its original pack for storage.
• Pressure Release: It is mandatory to release all pressure via the pressure release valve (269) before refilling, after use, or before opening the sprayer. The sprayer should never be left pressurized when not in use. Users are cautioned not to tamper with the pressure release valve.

Maintenance Features:

The Cuprinol Fence Sprayer incorporates features and guidelines to ensure its longevity and continued performance:

• Cleaning:
  • After use, fill the sprayer with water and reseal.
  • Shake the sprayer and repressurize.
  • Spray the water into an empty container until the waste water runs clear.
  • Do not dispose of washings into drains or watercourses.
  • Thoroughly clean filters (346, 664) and the seal (165) under running water with a hard bristle brush.
  • Avoid using wire, pins, or sharp objects to clean the nozzle (665, 666) to prevent damage and maintain spray pattern.
  • Ensure all parts of the trigger mechanism (743, 990, 991) are clean.
• Storage:
  • Ensure all liquid is completely drained from the sprayer and hose.
  • It is best to detach the hose (992) from the sprayer tank and handset during storage.
  • To avoid losing smaller components, it is recommended to attach 990, 901, and 743 together.
• Lubrication: A few drops of lubricating oil in the pumping mechanism (406) will protect the collar seal (164).
• Component Checks: Before each use and after storage, check all component parts for excessive wear and tear or damage. Damaged parts must not be used.
• Replacement Parts: Only authorized replacement components should be used. A detailed parts list is provided to aid in identifying specific components for replacement.
• Repairs: All repairs must be carried out by an authorized service agent.
• Guarantee: The 3-year guarantee covers the complete sprayer or individual components against manufacturing or material faults. It does not cover damage from misuse, improper handling, unauthorized modifications, normal wear and tear, negligence, or use with unapproved products.
• Disposal: Dispose of the sprayer according to local authority guidelines.

The Cuprinol Fence Sprayer is a dedicated tool designed to simplify and improve the application of specific Cuprinol wood treatments, emphasizing user safety, effective performance, and ease of maintenance.

Cuprinol FENCE SPRAYER Specifications