QUICK START
1. Attach brush head
Caution: Do not bend.
2. Switch on
Press button briey.
3. Mode selection
Press the button and hold it down to switch to the next
mode: from «start» to «clean» to «smile». When you
reach the desired mode, release the button.
4. Brushing your teeth
Clean from tooth to tooth, fully relaxed; let the
bristles do the work; keep the brush as still as possible,
pressing down only slightly, or ideally not at all.
5. Two-minute timer with 30-second interval
• Aer 30 seconds, three short, consecutive pauses
of 0.2 seconds each will indicate that it’s time to move
to a dierent quadrant in your mouth.
• A long interruption indicates that two minutes have
passed. Aer four minutes, the ‘Hydrosonic easy’
turns o automatically.
6. Switch o
Press button briey, and the mode you used last will be
saved for next time.
Press briey:
on/o
Press and hold:
Mode selection
start clean smile
15