10
1. Set up your Echo and CPC Bridge
If your Amazon Echo device is not yet set up, do so
now by following the instructions that came with your
Amazon Echo.
Also be sure the bridge and MyCurtains app have been
setup. For instructions on how to set up your bridge and
app, see the Bridge Set Up Guide on page 2.
2. Download the Skill
you are on that page, hit the spyglass icon at the top right
hand corner.
like to use [Fig D1-D2]. If you want to be able to trigger
Alexa using both phrases, be sure to download both
skills.
D. Set up with Amazon Echo
(Alexa)
(without using Alexa plus built
in hub)
Once the Current Products Corp. Bridge has been setup
with the MyCurtains app and all devices have been added,
you can connect the system to Amazon Alexa.
Be aware that certain Alexa devices have a built-in Zigbee
hub (Echo Plus). If you would like to use the built-in hub
instead of the CPC hub, proceed to the instructions in
E-Wand(s).
You do not have to use the Alexa-integrated hub on Echo
Plus devices unless you wish to do so.