Curtis enGage IV - Sender Function Troubleshooting; Maintenance Function Troubleshooting; 5.0 Maintenance

Curtis enGage™ IV Manual
page 10
Sender Function
Problem Possible Cause
No Display Terminals not connected.
Improper voltage.
Stays At Sender or Sender Connection Problems.
Maximum/Minimum Sender connected to wrong terminal.
Incorrect sender used.
Maintenance Function
Problem Possible Cause
Will Not Reset Procedure as described in Section 2.6 not being
followed.
5.0 Maintenance
The enGage™ IV 3210 series is not serviceable.