EasyManua.ls Logo

Curtis LCD1992A - Instruction: Control Overview; Front Panel Control Buttons; Instruction: Connection Options; Connection Ports Overview

Curtis LCD1992A
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
INSTRUCTION
Left Connection Panel
CONNECTION OPTION
This is the back panel LCD TV
■ This is a simplified representation of a back panel.
Here shown may be somewhat different from your TV.
(01)
(02) USB:Input USB device input
(03) HDMI Input: Connect HDMI signal.
(04) YPBPR(Y:GREEN, PB:BLUE, PR:RED): Connect the component image output
of your AV devices here. Then Connect audio output of your AV devices to R and L.
(05)AV Video Input:Connect composite video output of your AV device and Connect the
audio output of your AV devices to R and L.
(06) PC VGA Input: Connect PC VGA signal output.
(07) RF: Antenna Input (75 ohm).
(08) PC AUDIO Input: Connect PC audio input.
(09) EARPHONE output: Connect to headphone output.
(POWER) DC IN : Connect the power cord with DC12V to this input.
3
5
6
7
8
9
21
4
A
8
INSTRUCTION
CONTROLS
Front Panel Controls
This manual explains the features available on the model of LCD TV.
This is a simplified representation of a front panel. Here shown may be somewhat
different from your TV.
Front Panel Controls
(1): (VOL-) Press Volume- to decrease the volume.
(2): (VOL+) Press Volume+ to increase the volume.
(3): (CH-) Press the button to down the channel.
(4): (CH+) Press the button to up the channel.
(5): (SOURCE) Press this button to select AV source or TV source.
(6): (MENU) Press this button to display the OSD menu.
When the OSD menu is on, press this button to exit the menu.
(7): (POWER) Press this button to standby mode.
(8): Indicator.
(9): Remote control sensor window.
1
4
2
5 76
3
9
8

Related product manuals