5
Getting Started
1. AC POWER IN: Connect to an earth 100-240V, 50/60Hz AC outlet with the Power Cable.
2. SWITCH: Turn on/off the AC power.
3. YPbPr1 L/R in: Connect them to the audio output terminal of DVD(with YPbPr1).
4. YPbPr2 L/R in: Connect them to the audio output terminal of DVD(with YPbPr2).
5. VIDEO/S-VIDEO L/R in: Connect them to audio output terminal of DVD(with VIDEO/S-VIDEO).
6. YPbPr1: Connect them to the video output terminal of DVD.
7. YPbPr2: Connect them to the video output terminal of DVD.
8. PC AUDIO IN: Connect it to the audio output terminal of PC.
9. VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC.
10.HDMI1: Connect it to the HDMI of DVD or other equipment.
11.HDMI2: Connect it to the HDMI of DVD or other equipment.
12.VIDEO: Connect it to video output terminal of DVD.
13.S-VIDEO: Connect it to S-Video output terminal of DVD.
14.RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
YPbPr1 YPbPr2
L in L in L in Y Pb Pr 1 VIDEO
AC POWER IN
SWITCH R in R in
PC
AUDIO
IN
VGA HDMI1 HDMI2 S-VIDEO RFY Pb Pr 2R in
VIDEO
S-VIDEO
1234567891011121314
To Next Page
Loading...
